Owner's manual

ManualsBrandsEdsal ManualsFurniturePromaxx CB721836

Use Caution when handling and assembling metal parts. The metal may have sharp edges or corners. The use of pro-

tective gloves is recommended. Do not use this unit for anything that is outside the designed function of storage. Do

not store loose or heavy items on the top shelves or on the top of the unit, for they create a falling hazard that can injure

yourself or others. Always remember to use proper lifting techniques when moving either the boxed or assembled unit.

Part List & Product Specification : Pro

Maxx CB721836 Storage Cabinet (patent pending)

Safety Instructions

It is recommended that the cabinets are assembled by more than one person. Use of a raised flat surface during

assembly is highly recommended. During shipping and handling, some of the tabs that are used for assembly

may have closed together. Use a flat tipped screwdriver to either pry up or push from behind the tab to re-open.

To assure the squareness of the unit, do not fully tighten the nuts and screws used in the assembly until all are in

place. After all nuts and screws are in place, square the unit and tighten all nuts and screws appropriately. Make

sure that the unit is placed on a level surface, as this may effect the performance of the unit.

General instructions

Should you have any comments, damage, missing parts, or problems with assembly of this unit please feel free to contact

our Pro-Maxx manufacturing facility at, (773) 475-3000 and request customer service. We can also be reached on the

internet at the following email address : customerservice@edsal.com.

To obtain replacement parts, please provide the following information :

- Model # - Part # & Description - Location Purchased - Date Purchased

Page 1

(A) Right Hand Back

(B) Left Hand Back

(F) Bottom

(E) Top

(G) Top Shelf

(D) Left Hand Side

(I) Right Hand Door

(J) Left Hand Door

(K) Door Rods

Reference

Right Hand Back

Left Hand Back

Right Hand Side

Left Hand Side

Top

Bottom

Shelves

Shelf Clips

Right Hand Door

Left Hand Door

Door Rods

Screws (unslotted)

Nuts

Handle

Description

CCBK7218R

CCBK7218L

CCSD7122R

CCSD7122L

CCTO4123

CCBO3624

CCSH3719

7000CLP

CCDO6718R

CCDO6718L

CCDR3200

F102438S

F1024N

201L

Part Numbers for : CB721836

72”h x 18”d x 36”w

Qty.

(H) Shelf Clips

(L) Screws

(M) Nuts

(N) Handle

Required Tools

- 3/8” Socket or Nut Driver

- Small Blade Screwdriver

- Tipped Screwdriver (hole & tab

opening assistance)

MODEL NUMBER

CB721836

Storage Cabinets

Pro-Maxx Manufacturing

4400 South Packers Avenue

Chicago, IL 60609

www.edsal.com

Summary of content (4 pages)

PAGE 1
Storage Cabinets MODEL NUMBER CB721836 Page 1 (H) Shelf Clips (L) Screws (M) Nuts (K) Door Rods (C) Right Hand Side (A) Right Hand Back (B) Left Hand Back (N) Handle (I) Right Hand Door (D) Left Hand Side (J) Left Hand Door Required Tools (E) Top (F) Bottom - 3/8” Socket or Nut Driver - Small Blade Screwdriver - Tipped Screwdriver (hole & tab opening assistance) (G) Top Shelf Safety Instructions Use Caution when handling and assembling metal parts. The metal may have sharp edges or corners.
PAGE 2
Assembly Instructions for Pro Pro--Maxx Cabinets Page 2 Important Please Read First This instruction sheet was designed to help you assemble this unit in the proper way, please follow them using all parts and fasteners provided. Any alteration or deviation from this instruction sheet can result in unit failure. If you have any assembly problems or questions, please feel free to contact our Pro-Maxx manufacturing facility at (773) 475-3000 during the hours of 9:00 a.m. to 5:00 p.m.
PAGE 3
Assembly Instructions for Pro Pro--Maxx Cabinets Step 2 - Side Assembly First step is to identify the right side panel and the left side panel. Identify by taking one of the panels and place the tab edge facing down. Notice the hinges are now facing up. Now look at the top and bottom edges. The top has a round and square hole, and the bottom has two round holes (see figure 2 for references).
PAGE 4
Assembly Instructions for Pro Pro--Maxx Cabinets Step 5 - Door Assembly Page 4 Figure 5 - Door Assembly First the unit needs to be squared. Turn the unit upright and place on a level floor. Loosen and re-tighten the screws appropriately to ensure the unit is square. Now the doors are ready to be hung. With the hinge pins pointed down, select the door with three (3) holes for the handle cutout (see figure 5 for assistance). This is the right hand door.