Datasheet

EDSYN GMBH EUROPA
Zentrum für Löt- und Entlötsysteme
EDSYN GMBH EUROPA, Postfach 1169, D-97888 Kreuzwertheim
10.12.2013
EDSYN GMBH EUROPA • D-97892 Kreuzwertheim • Finkenweg 2 •  (09342) 6413 

 (09342) 6417
Material Safety Data Sheet - according to directive 91/155/EWG
INTERNATIONAL STANDARD NORM ISO 11014-1
Trade Name: SC Solder wire S-Sn99.3 Cu0.7 Flux F-SW 34
DIN EN 29 453 NF EN 29 454.1
1.) Manufacturer:
Address:
EDSYN GMBH EUROPA
Finkenweg 2 Tel.: 09342 - 6413
D 97892 Kreuzwertheim Fax: 09342 - 6417
2.) COMPOSITION / INFORMATION ON
INGREDIENTS
2.1 Hazardous ingredients:
2.2 Representative hazardous
ingredients:
2.3 Other hazardous ingredients:
2.4 Substances present at a
concentration below the minimum
danger threshold:
2.5 Other substances with
occupational Exposure Limit
Values:
Labelled with the R phrases given in section 3.
Not applicable
Not known substance of this category is present.
-
CAS 7440-31-5 TIN METAL
CAS 7440-8 COPPER METAL
3.) HAZARDS IDENTIFICATION
3.1 Risk phrases:
This product is not classed as flammable. See the recommendations
concerning the other products in the room.
This product is stable.
R 36 Irritating to eyes.
4.) FIRST AID MEASURES
Dusts and fumes:
4.1 In case of exposition by inhalation:
4.2 In case of skin contact:
4.3 In case of ingestion:
4.4 In case of eye contact:
In case of large quantities inhaled, remove from the exposure area.
Wash nose and lips.
Wash with water and soap.
Seek medical advice.
Flush thoroughly with clear water.
Incase of persisting irritation seek an ophthalmologist.
5.) ACCIDENTAL RELEASE MEASURES
5.1 Suitable extinguishing media:
5.2 Extinguishing media which must
not be used:
Solder wires Sn 99.3 Cu 0,7 are not flammable.
No specific agent, use the suitable media appropriate for surrounding
material.
Water on liquid metal.