Instructions / Assembly

IMPORTANT SAFETY INSTRUCTIONS:
.
.
This product must be installed in accordance with installation instructions
and all safety and building codes. It is strongly suggested that all direct
wired fixtures be installed by a licensed electrician
Be sure the electricity to the wires you are working on is shut off; either the
fuse is removed or the circuit breaker is turned off. Turning the power off
using the light switch is not sufficient to prevent electrical shock
.
Please read through all the instructions carefully and completely before
beginning assembly and installation
MOUNTING AND WIRING
WARNING:
Improper installation may cause electrical shock, fire, or equipment damage.
The person performing the installation must be familiar with the construction
and operation of the product and associated hazards
Please proceed in an alphabetical order:
.
.
.
Wire Connection Diagram:
A.Existing EIextricaI BOX B.Crossbar C.Crossbar Screws
D.Ground Wire E.Canopy F.Wire G.Junction Caps
attach the crossbar(B)to the existing eIectricaI box(A) using the two
crossbar screws(C)which are not suppIied and shouId aIready in your box.
Pass the main wire(F)and ground wire(D)through the canopy(E)and the
crossbar(B)untiI the end of the main wire(F)reaches the eIectricaI box
(A)where you can wire use eIectrician connections.Be sure when
connecting the wire use eIectrician approved junction caps(G).stow
the excess wire in the eIectricaI box(A).raise the canopy(E),attach
canopy(E)to ceiIing,and hoId the canopy(E).
A
B
C
D
F
G
GND
Please include your name, contact methods, product name, and model number in the email.
Customer Service Number: [phone]
Customer Service Email: [e-mail]
Manufacturer Part Number: EPL1355BK
lnstallation lnstructions
WARNING: This product can expose you
go to www.P65Warnings.ca.gov
to chemicals including lead,which is known to the
State of California to cause cancer or birth defects
or other reproductive harm. For more infomation