Radius Roller RRM2 Installation Manual Original Instructions - RRM2
Installation Manual 1 General Operator and Supervisor Information Signal Word Definition Signal Word Panel 2 Installating the Radius Roller Environmental Requirements at Work Station Receiving the Radius Roller Unpacking/Moving the Radius Roller Installing the Radius Roller 3 Hydraulic Power Sources Powering With an Edwards Ironworker Powering With an Edwards Porta-Power Table of Contents Signal Word Definition Operatorand SupervisorInformation This is one of four manuals supplied with your machine.
Radius Roller Installation Refer to Safety, Installation, Operations and Maintenance manuals for the Edwards power-plant you are using to operate your Edwards Hydraulic Accessory Tool. Environmental Requirements at Work Station 1. Carefully remove packaging. 2. Carefully remove the lagbolts and washers attaching the Roller to the shipping pallet. 3. Locate the fork-lift areas directly under the Radius Roller base assembly 4. Carefully insert forks under the roller base assembly.
S P.O. Box 166, Albert Lea, MN 56007 800-373-8206 www.edwardsironworkers.