Product Manual B

2
3
DECLARATION OF NOISE EMISSION Sound Pressure and Sound Levels per EN ISO 1102
Date of Issue: 01/11/2013
Machinery:
Model: 50 Ton
Type: Hydraulic Punching Machine
Serial Number: Refer to Title Page
Operating Idle
L
pAm
(Operator Position) 84 dB (A) 43 dB (A)
L
pAm
(Bystander Position) 81 dB (A) 41 dB (A)
Peak C-weighted instantaneous SPL in the Operator’s position L
pCpeak
95 dB (C) ---
Sound power emitted where the equivalent continuous A-weighted SPL exceeds 80 dB (A). 8.4 Bel ---
The average difference between the extraneous noise level and the sound intensity level at each measuring point is: L
pAm
Δ = 41 dB (A)
Ambient Correction Factor K3A calculated according to EN ISO 11204 Appendix A. 4 dB( A)
Measurements were made at a height of 1.5 m and 1 m from the Operator Position and all four sides of the equipment.
The gures quoted are emission levels and are not necessarily safe working levels. While there is a correlation between the emission and exposure levels this cannot be used reliably to
determine whether or not further precautions are required.
Factors that inuence the actual level of exposure of the workforce include characteristics of the work room, the other sources of noise, etc. such as the number of machines and other
adjacent processes. Also, the permissible level of exposure can vary from country to country.
This information, however, will enable the user of the machine to make a better evaluation of the hazard and risk.
Edwards Manufacturing Company 1107 Sykes Street Albert Lea, MN 56007 USA
Declaration of Conformity with ANSI / ISO / NFPA / OSHA Standards relating to the Manufacture of Ironworking Machinery
Date of Issue: 12/05/2013
Applicable Standards: ANSI / ISO / NFPA / OSHA
Conforming Machinery: Model: 50 Ton
Type: Hydraulic Punching Machine
Serial Number: Refer to Title Page
Manufacturer: Edwards Manufacturing Company
1107 Sykes Street
Albert Lea, MN 56007, USA
Harmonised Standards
Referenced or Applied:
ANSI B11.05, ANSI B11.0, ANSI B11.19, ANSI / ASSE Z244.1, ANSI Z535.2, ANSI Z535.3, ANSI Z535.4, ANSI Z535.5, ANSI / ISO 12100, ISO
13849-1, NFPA 79, OSHA1910.147, OSHA1910.212, OSHA1910.219
We hereby certify that the machinery described above conforms with the essential health and safety requirements of Council Directive 2006/42/EC on the approximation of the laws of the
Member States relating to the safety of machinery.
Signed:
Signatory:
Printed Name : Douglas L. Friend
Title: Chief Operating Ofcer
Technical File Reference Number SF11987A1.EMC
Notes Concerning Harmonized Standards Referenced or applied:
ANSI B11.05 1988 (R2008) Ironworkers - Safety Requirements for Construction, Care and Use
ANSI B11.0 2010 Safety of Machinery - General requirements and Risk Assessment
ANSI B11.19 Performance Criteria for Safeguarding
ANSI / ASSE Z244.1 2003 (R2008) Control of Hazardous Energy - Lockout / Tagout and Alternate Methods
ANSI Z535.2 2011 Environmental and Facility Safety Signs
ANSI Z535.3 2011 Criteria for Safety Symbols
ANSI Z535.4 2011 Product Safety Signs and Labels
ANSI Z535.6 2011 Product Safety Information in Product Manuals, Instructions, and Other Collateral Materials
ANSI / ISO 12100 Safety of Machinery - General Principles for design - Risk Assessment and risk reduction.
ISO 13849-1 Safety of machinery. Safety related parts of control systems. General principles for design.
NFPA 79 2012 Electrical Standards for Industrial Machinery
OSHA1910.147 1989 The Control of Hazardous Energy (Lockout / Tagout)
OSHA1910.212 1971 General Requirements for all Machines
OSHA1910.219 1971 Mechanical Power Transmission Apparatus
Company Profile
Edwards Manufacturing
Company manufactures
a full line of high quality,
low maintenance hydraulic
ironworking machines, associated
tooling and accessories that are used in the
steel fabrication industry. With proper operation, care,
and maintenance, your Edwards Ironworker or Hydraulic
Accessory Tool will provide years of safe, trouble-free
service. Please take time to study this Operator’s Manual carefully
to fully understand Ironworker and Hydraulic Accessory Tool safety
procedures, set-up, operation, care, maintenance, troubleshooting
and warranty coverage prior to putting the machine into production.
Any questions not answered within this manual can be directed
to your local Edwards Ironworker dealer or factory representative.
Contact the factory:
Edwards Manufacturing
Company
1107 Sykes Street
Albert Lea, MN 56007
507 373 8206 PHONE
507 373 9433 FAX
www.edwardsironworkers.com
General Questions:
[e-mail]
Service Questions:
[e-mail]
Contact your dealer:
Warranty
Edwards Manufacturing Company will, within one (1) year
of date of original purchase (proof of purchase required),
replace F.O.B. the factory, any goods, excluding punches,
dies and shear blades, which are defective in materials or
workmanship provided that the buyer return the defective
goods, freight pre-paid, to the seller, which shall be the
buyer’s sole and exclusive remedy for the defective goods.
Hydraulic components are subject to their manufacturer’s
warranty.
Edwards Manufacturing Company will, within thirty (30) days
of date of original purchase (proof of purchase required),
replace F.O.B. the factory, any punches, dies and/or shear
blades, which are defective in materials or workmanship.
This warranty does not apply to machines and/or components
which have been altered, changed or modied in any way,
or subjected to abusive and abnormal use, inadequate
maintenance and lubrication, or subjected to use beyond
seller recommended capacities and specications. Edwards
Manufacturing Company shall not be liable for labor costs
expended on such goods or consequential damages.
Edwards Manufacturing Company shall not be liable to
the purchaser or any other person for loss, down-time, or
damage directly or indirectly arising from the use of the
goods or from any other cause. No ofcer, employee, or
agent of Edwards Manufacturing Company is authorized to
make any oral representations or warranty of tness or to
waive any of the foregoing terms and none shall be binding
on Edwards Manufacturing Company.
Machine Identification
Your Edwards Ironworker has been serialized for quality control, product
traceability and warranty enforcement. Please refer to the aluminum
identication tag with engraved serial number, electrical and power
specications when ordering parts or ling a warranty claim.