Cut Sheet

Hazardous,
NEMA &
IP Definitions
Visual
Signals
Process
Control
Signals
© 2000 EDWARDS
CHESHIRE, CT 06410
www.edwards-signals.com
3-4
Fax-on-Demand # 1019
Cat. No.
101 Series
Edwards
®
101 Series AdaptaLight
®
Heavy Duty Industrial
Stackable Beacons
The horn can be operated as a sixth
independent signal or in conjunction
with any one of the light modules.
Electrical interconnection between
units is through solid copper busses.
Each module is firmly connected to
the one below by a solid through-bolt
and an attachment screw between
the lens and module. A screw-type
terminal strip in the base allows for
positive connection to each module.
Light Modules
The incandescent, halogen and
strobe light modules are available in
six colors: red, amber, blue, green,
magenta, and clear. The LED modules
are available in four colors: red, am-
ber, blue and green. Double fresnel
polycarbonate lenses provide a 360
degree non-shadowed light pattern.
A maximum of five light modules in
Features
• PLC compatible
• Seven gasketed modules -
Steady-on incandescent module
Steady-on halogen module
Steady-on LED module
Flashing incandescent module
Flashing halogen module
Flashing LED module
Strobe module
• Modules stackable in any
combination or color
• Strobe models available in 120V AC;
12V & 24V DC; incandescent models
available in 12V DC; Halogen
models available in 120V AC & 24V
DC; models with LED cluster
available in 24V DC & 120V AC
• Base unit comes with 85 dB
pulsating horn
• Vibration resistant heavy duty
industrial design
• Module rearrangement requires no
wiring
• 300,000 peak candela strobe
Description
The Edwards AdaptaLight Stackable
Beacon is a unique audible-visual sig-
naling device which can contain up to
5 light modules and a pulsating horn
in a single “stack.” It is for heavy
duty use in locations where visibility
over longer distances is required. All
modules are gasketed.
The 9 watt halogen bulb is rated by
the manufacturer at 52 lumens. The
12 watt halogen bulb is rated by the
manufacturer at 70 lumens.
Agency Approvals
• UL Listed for indoor & outdoor
applications
• CSA Certified
Base Unit
The base of the AdaptaLight
Stackable Beacon contains a pulsat-
ing horn rated at 85dB at 10 feet.
any combination of color or type can
be stacked on the base unit.
Steady-On Incandescent and
Halogen Modules
The Steady-On light modules provide
a constant visual signal. The halogen
models provide increased visibility
and longer lamp life. They are ideal
for start/stop functions, on/off pro-
cesses or continuous duty visual sig-
naling applications. When installed
with other multiple color modules
and the pulsating horn, the unit can
be configured to visually and audibly
communicate status changes.
Steady-On LED Module
The long life Steady-on LED Module
provides a constant visual signal. It is
ideal for start/stop functions, on/off
processes or continuous duty visual
status indicating applications.
Max. off state Cont. on Surge
Operating leakage current current (inrush/duration)
Cat. No. voltage* mA mA Amps/milliseconds
101BS-G1 24V DC 25 50 2/1
101BS-N5 120V AC 25 50 2/1
101FINH( )-G1 24V DC 25 320 1.2/100
101FINH( )-N5 120V AC 25 110 1.15/8
101SINH( )-G1 24V DC 25 320 .36/1
101SINH( )-N5 120V AC 25 110 .5/8
101FLED( )-G1 24V DC 4 65 .07/1
101FLED( )-N5 120V AC 5 25 .09/8
101SLED( )-G1 24V DC 4 65 .07/1
101SLED( )-N5 120V AC 5 25 .09/8
101ST( )-G1 24V DC 1.5 300 0.33/1
101ST( )-N5 120V AC 5 120 2.1/1
*All AC volts at 60 Hz
PLC Compatible*
Signal Input Load Characteristics
*PLC COMPATIBILITY
This device may be operated by PLCs that match the input load require-
ments of this signal. Be sure to match the input load characteristics of the
signal with the output characteristics of the PLC before connecting.
Courtesy of Steven Engineering , Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: [phone] ! Outside Local Area: [phone] ! www.stevenengineering.com