Cut Sheet

Bells &
Buzzers
Horns &
Sirens
Message
Centers &
Annunciators
Outdoor
Warning
Signals
Electric
Chimes
Push Buttons
Contactors
Door Devices
Transformers
Fire Alarm
Equipment
Clocks
ADA/Hospital
Signaling
Devices
Telephone
Signals &
Accessories
Appendix
Visual
Signals
Electronic
Signals
© 2000 EDWARDS
CHESHIRE, CT 06410
www.edwards-signals.com
3-5
Fax-on-Demand # 1019
Edwards
®
AdaptaLight Stackable Beacon Specifications
Pipe Mounting Method
Direct Surface Mounting Method
(with or without 4" octagonal box)
1/2" (13mm) Conduit
(Not Supplied)
Conduit mount
entrance hole
Grounding
Screw
Grounding
Screw
#10 Wood Screws
(Not Supplied)
Remove (2) Knockouts
for direct surface mounting
Clamp Unit
NOTE: It is not
necessary to
disassemble
this portion
for installation.
Terminal
Block
Horn
Base
Top
Base
Bottom
Base
Unit
Base Horn
Assembly
Base Skirt
Base Gasket
Module Gasket
Cap
Gasket
#6 x 3/8" (10 mm)
Phillips head cap screw
Supplied with
Base Unit
Height - 7 3/4" (197 mm)
Weight - 3 lbs (1.4 kg)
Height - 18 5/8" (473 mm)
Weight - 6 lbs (2.7 kg)
Height - 15" (381 mm)
Weight - 5 lbs (2.3 kg)
Height - 11 3/8" (289 mm)
Weight - 4 lbs (1.8 kg)
Height - 22 1/4" (565 mm)
Weight - 7 lbs (3.2 kg)
3 5/16"
(100 mm)
6"
(152 mm)
3/4"
(19 mm)
3 5/8"
(92 mm)
3 1/2"
(89 mm)
Flashing Incandescent and
Halogen Modules
The Flashing light modules command
immediate attention. The halogen
models provide increased visibility
and longer lamp life. They work well
as a warning signal when used with
the steady-on module. Applications
include audible and visual signaling of
equipment malfunction.
Flashing LED Module
The flashing LED module also com-
mands attention and works well as a
status indicating signal and is ideal
where long life (100,000 hours) is a
requirement. Applications include
audible and visual signaling of equip-
ment malfunction.
Strobe Module
The AdaptaLight strobe module is
ideal for high ambient light areas.
When used with the incandescent or
LED light modules, it can be used to
effectively signal urgent status
changes. Up to five self-contained
strobe modules can be used in the
AdaptaLight in any position in the
stack.
Mounting
Surface or 1/2" (12mm) NPT conduit
pipe mounting in non-hazardous dust
and weatherproof applications.
For indoor applications, may be verti-
cally mounted with lenses facing up
or down. For weatherproof installa-
tion, unit must be mounted vertically
with lenses facing up.
May be corner mounted using the
Cat. No. CBR, corner mount bracket,
or wall mounted using the Cat. No.
WBR, wall mount bracket. See
AdaptaBeacon Accessories page.
Courtesy of Steven Engineering , Inc. ! 230 Ryan Way, South San Francisco, CA 94080-6370 ! Main Office: [phone] ! Outside Local Area: [phone] ! www.stevenengineering.com