Cut Sheet

www.edwardssignaling.com
1-36
TM
VISUAL SIGNALS
1
Signal Input Load
Characteristics
PLC output to meet following product input parameters
These devices may be operated by PLCs with output characteristics that match the input load requirements of the signal.
Cat. No.
Operating
Voltage
Max. Off State Leakage
Current (A)
Continuous On
Current (A) Surge (inrush / duration)
102SIGST-N5 120V AC 0.005 0.070 .35 A / .5 millisecond
102SIGST-G1 24V DC 0.005 0.050 .24 A / .2 millisecond
102SIGMT-N5 120V AC 0.005 0.070 .35 A / .5 millisecond
102SIGMT-G1 24V DC 0.005 0.050 .24 A / .2 millisecond
102LS-SIN-N5 120V AC 0.025 0.080 .15 A / 8 millisecond
102LS-SIN-G1 24V DC 0.025 0.032 .36 A / 1 millisecond
102LS-SINH-N5 120V AC 0.025 0.110 .5 A / 8 millisecond
102LS-SINH-G1 24V DC 0.025 0.320 .36 A / 1 millisecond
102LS-FIN-N5 120V AC 0.025 0.080 .3 A / 8 millisecond
102LS-FIN-G1 24V DC 0.025 0.032 1.4 A / 100 millisecond
102LS-FINH-N5 120V AC 0.025 0.110 1.15 A / 8 millisecond
102LS-FINH-G1 24V DC 0.025 0.320 1.2 A / 100 millisecond
102LS-ST-N5 120V AC 0.005 0.120 50 A / 1 millisecond
102LS-ST-G1 24V DC 0.0015 0.300 .33 A / 1 millisecond
102LS-SLED*-N5 120V AC 0.005 0.025 .09 A / 8 millisecond
102LS-SLED*-G1 24V DC 0.005 0.065 .025 A / 1 millisecond
102LS-FLED*-N5 120V AC 0.005 0.025 .09 A / 8 millisecond
102LS-FLED*-G1 24V DC 0.005 0.065 .07 A / 1 millisecond
*Letter in this position designates lens and LED color: A - amber, B - blue, G - green, R - red or W - white
StackLight
™
102 Series