User's Manual

EE Bright Box User Manual
12
• DSL
port
• Reset
button
• Ethernet Ports
o WAN
port for Fibre broadband services (also known as LAN 4)
o LAN ports (1
-4)
• USB port
• ON/OFF
power switch
• Power
socket
• WPS
button
The table below describes the ports, sockets and buttons on the back panel of the Bright Box
router:
Item
Description
DSL port
For ADSL broadband, connect one end of a broadband
cable (RJ
-11) to this port and the other end to a filter and
the telephone line.
Reset button
Press briefly to restart the router, or press for 6 seconds to
return the router to factory default settings.
WAN port
For ADSL broadband, connect one end of an Ethernet
cable (RJ
-45) to this port to use as a normal LAN port (LAN
4).
For Fibre broadband, connect one end of an Ethernet
cable (RJ
-45) to this port and the other end to the Fibre
modem.
LAN port
Connect one end of an Ethernet cable (RJ-45) to this port,
and the other end to a computer (or other Ethernet
device) with a LAN card installed.
USB port
Connect a USB storage device such as a USB hard drive to
this port.
See USB File Sharing on page 88
Power switch
Use this switch to turn the router on/off.
Power socket
Connect the supplied power adapter to this socket.