Dimensions Guide

13kW ELECTRIC TANKLESS

WATER HEATER

INLET TEMP 37°F 57°F47°F 67°F52°F 72°F42°F 62°F 77°F

EEM24013 1.3 GPM 1.8 GPM 3.2 GPM1.5 GPM 2.3 GPM1.7 GPM 2.7 GPM1.4 GPM 2.1 GPM

MODEL

EEM24013 13

*NPT FITTING ADAPTOR SUPPLIED

240 60 AMPS 1x6 AWG 1/2” CF*

kW VOLTS CONNECTIONCABLE REQUIREDBREAKER

The EEM24013 is designed to handle point of use applications or a small apartment in warmer climates.

The EEM24013 can provide hot

water for one sink in colder climates, or one shower and one sink in warmer climates. Refer to the sizing chart below to see if this

model is optimal for your inlet water temperature and hot water demand.

TEMPERATURE RISE

PRODUCT ATTRIBUTES

• On-demand, endless hot water

• Compact, durable and stylish

• Digital temperature control in increments of 1°F

• Dimensions: 12” x 9.75” x 3.75”

• 99.8% energy efficient

• Copper heating elements with brass top increase

durability and are threaded for easy replacement

• Simple Installation: 3-ft. electric cable included and

1/2” CF connection with an option 1/2” NPT adaptor.

GALLONS PER MINUTE (GPM) BASED ON WATER TEMPERATURE OF 105°F

HEAT WATER FOR ONE WATER SAVER

SHOWER HEAD AT THIS INLET WATER

TEMPERATURE

HEAT WATER FOR ONE WATER SAVER

SHOWER HEAD AND ONE HAND WASHING

SINK SIMULTANEOUSLY AT THIS INLET

WATER TEMPERATURE

HEAT WATER FOR TWO WATER SAVER

SHOWER HEADS SIMULTANEOUSLY AT

THIS INLET WATER TEMPERATURE

PAGE 1
3kW ELECTRIC TANKLESS WATER HEATER MODEL kW VOLTS BREAKER CABLE REQUIRED CONNECTION EEM24013 13 240 60 AMPS 1x6 AWG 1/2” CF* *NPT FITTING ADAPTOR SUPPLIED TEMPERATURE RISE The EEM24013 is designed to handle point of use applications or a small apartment in warmer climates. The EEM24013 can provide hot water for one sink in colder climates, or one shower and one sink in warmer climates.
PAGE 2
13kW ELECTRIC TANKLESS WATER HEATER Units shall have enameled steel rated cover. Element shall be standard Emerson (or equal manufacturer) copper heating elements with threaded brass top. Unit shall have a replaceable mesh filter in the inlet. Heater shall be fitted with 1/2” plumbing connections for easy flex hose connection to eliminate need for soldering. ETL LISTED: 4000856 U.S. PATENT#: 7,945,146 OPERATING PRESSURE MIN. 25 PSI MAX. 150 PSI NOTE: FLOW ACTIVATED 0.