Dimensions Guide

18kW ELECTRIC TANKLESS

WATER HEATER

The EEM24018 can produce enough hot water for up to 1 shower and 2 sinks simultaneously in colder climates. In warmer climates it can

produce enough hot water for up to 4 showers or sinks simultaneously. Refer to the sizing chart below to see if this model is optimal for your

inlet water temperature and hot water demand.

TEMPERATURE RISE

PRODUCT ATTRIBUTES

• On-demand, endless hot water

• Compact, durable and stylish

• Digital temperature control in increments of 1°F

• Dimensions: 18” x 14” x 3.75”

• 99.8% energy efficient

• Copper heating elements with brass top increase

durability and are threaded for easy replacement

• Simple Installation: 3-ft. electric cable included and

1/2” CF connection with an option 1/2” NPT adaptor.

MODEL

EEM24018 18 240 2x40 AMPS 2x8 AWG 3/4” NPT

kW VOLTS CONNECTIONCABLE REQUIREDBREAKER

INLET TEMP 37°F 57°F47°F 67°F52°F 72°F42°F 62°F 77°F

EEM24018 1.8 GPM 2.6 GPM 4.5 GPM2.1 GPM 3.2 GPM2.3 GPM 3.7 GPM2.0 GPM 3.0 GPM

HEAT WATER FOR ONE WATER SAVER

SHOWER HEAD AND ONE HAND WASHING

SINK SIMULTANEOUSLY AT THIS INLET

WATER TEMPERATURE

HEAT WATER FOR TWO WATER SAVER

SHOWER HEADS SIMULTANEOUSLY AT

THIS INLET WATER TEMPERATURE

HEAT WATER FOR THREE WATER SAVER

SHOWER HEADS SIMULTANEOUSLY AT

THIS INLET WATER TEMPERATURE

GALLONS PER MINUTE (GPM) BASED ON WATER TEMPERATURE OF 105°F

PAGE 1
8kW ELECTRIC TANKLESS WATER HEATER MODEL kW VOLTS BREAKER CABLE REQUIRED CONNECTION EEM24018 18 240 2x40 AMPS 2x8 AWG 3/4” NPT TEMPERATURE RISE The EEM24018 can produce enough hot water for up to 1 shower and 2 sinks simultaneously in colder climates. In warmer climates it can produce enough hot water for up to 4 showers or sinks simultaneously. Refer to the sizing chart below to see if this model is optimal for your inlet water temperature and hot water demand.
PAGE 2
18kW ELECTRIC TANKLESS WATER HEATER 14” 18 ” Units shall have enameled steel rated cover. Element shall be standard Emerson (or equal manufacturer) copper heating elements with threaded brass top. Unit shall have a replaceable mesh filter in the inlet. Heater shall be fitted with 1/2” plumbing connections for easy flex hose connection to eliminate need for soldering. ETL LISTED: 4000856 U.S. PATENT#: 7,945,146 OPERATING PRESSURE MIN. 25 PSI MAX. 150 PSI NOTE: FLOW ACTIVATED 0.