Dimensions Guide

27kW ELECTRIC TANKLESS

WATER HEATER

The EEM24027 can produce enough hot water for up to 1 shower and 2 sinks simultaneously in colder climates. In warmer climates it can

produce enough hot water for up to 4 showers or sinks simultaneously. Refer to the chart below to see if this model is optimal for your inlet

water temperature and hot water demand.

TEMPERATURE RISE

PRODUCT ATTRIBUTES

• On-demand, endless hot water

• Compact, durable and stylish

• Digital temperature control in increments of 1°F

• Dimensions: 17” x 17” x 3.75”

• 99.8% energy efficient

• Copper heating elements with brass top increase

durability and are threaded for easy replacement

• Simple Installation: 3-ft. electric cable included and

1/2” CF connection with an option 1/2” NPT adaptor.

MODEL

EEM24027 27 240 3x40 AMPS 3x8 AWG 3/4” NPT

kW VOLTS CONNECTIONCABLE REQUIREDBREAKER

INLET TEMP 37°F 57°F47°F 67°F52°F 72°F42°F 62°F 77°F

EEM24027 2.7 GPM 3.8 GPM 6.6 GPM3.2 GPM 4.9 GPM3.5 GPM 5.6 GPM2.9 GPM 4.3 GPM

GALLONS PER MINUTE (GPM) BASED ON WATER TEMPERATURE OF 105°F

HEAT WATER FOR TWO WATER SAVER

SHOWER HEADS AT THIS INLET WATER

TEMPERATURE

HEAT WATER FOR TWO WATER SAVER

SHOWER HEADS AND TWO HAND

WASHING SINKS SIMULTANEOUSLY AT

THIS INLET WATER TEMPERATURE

HEAT WATER FOR FOUR WATER SAVER

SHOWER HEADS AND ONE HAND

WASHING SINK SIMULTANEOUSLY AT THIS

INLET WATER TEMPERATURE

PAGE 1
27kW ELECTRIC TANKLESS WATER HEATER MODEL kW VOLTS BREAKER CABLE REQUIRED CONNECTION EEM24027 27 240 3x40 AMPS 3x8 AWG 3/4” NPT TEMPERATURE RISE The EEM24027 can produce enough hot water for up to 1 shower and 2 sinks simultaneously in colder climates. In warmer climates it can produce enough hot water for up to 4 showers or sinks simultaneously. Refer to the chart below to see if this model is optimal for your inlet water temperature and hot water demand.
PAGE 2
7kW ELECTRIC TANKLESS WATER HEATER 17” 17 ” Units shall have enameled steel rated cover. Element shall be standard Emerson (or equal manufacturer) copper heating elements with threaded brass top. Unit shall have a replaceable mesh filter in the inlet. Heater shall be fitted with 1/2” plumbing connections for easy flex hose connection to eliminate need for soldering. ETL LISTED: 4000856 U.S. PATENT#: 7,945,146 OPERATING PRESSURE MIN. 25 PSI MAX. 150 PSI NOTE: FLOW ACTIVATED 0.