Specification Sheet
Information and product specications contained in this document are subject to change without notice. REV 2020-04-09
Specications
Electric MiniTank Water Heater
MiniTank
™
1.5, 2.5, 4 and 6 MiniTanks Deliver Hot Water Eciently
Performance Features
•
Point-of-use heating eliminates long hot water pipe runs
•
Compact design ts virtually anywhere
•
Easy and ready to install
•
Hot or cold water feed
•
Adjustable temperature control 50°-140°F
•
T&P relief valve included
•
Enameled glass lined tank for extended life
•
Floor and wall mountable, wall bracket included
•
Field replaceable element
•
ETL tested to UL 174 and NSF 372
•
All models plug into standard outlets with cord included
•
Single weld design
•
Tank status indicator lights
Product Specications
Voltage: 120V
Amperage: 12 A
Heating Capacity: 1440 watts
Phase: Single
Temperature Range: 50°F-140°F
Maximum Operating Pressure: 150 PSI
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Water heater shall be an Eemax MiniTank model number
EMT______.
Unit shall be enameled glass lined with a single weld design.
Water connections and supplied T&P valve to be located on top
of the unit. Unit shall have an status indicator light with adjustable
thermostat. Unit to have a 6 year warranty against leaks.
Certied to UL174.
Tank
Volume
(gal)
Weight
(lb) Fittings
Recovery time
based on 60°
temp. rise
EMT1
1.6 13.9 1/2" NPT connections at TOP of unit 8 minutes
EMT2.5
2.6 17.6 1/2" NPT connections at TOP of unit 15 minutes
EMT4
3.8 21.0 1/2" NPT connections at TOP of unit 24 minutes
EMT6
6.1 27.1 3/4" NPT connections at TOP of unit 37 minutes
EMT1 EMT2.5
EMT4 EMT6
A
D
C
B
Dimensions EMT1 EMT2.5 EMT4 EMT6
Key inch mm inch mm inch mm inch mm
A 9.63 244.6 10.94 277.9 12.65 321.3 14.19 360.4
B 9.71 246.6 10.91 277.1 12.28 311.9 13.86 352.0
C 15.39 390.9 17.01 432.0 18.24 463.3 20.83 529.1
D 14.40 365.8 16.18 411.0 17.40 442.0 19.99 507.7
*Mounting bracket location on the back of unit
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372