Specifications

Specifications
Electric Tankless Water Heater
Information and product specifications contained in this document are subject to change without notice.
Eemax, 400 Captain Neville Drive, Waterbury, CT 06705
[phone] | [e-mail] | www.eemax.com
Applications
• Handwashing
• Kitchen, wet bar, utility sink
• Point-of-use & xed-ow xture
• One (1) lavatory faucet, sensor faucet or metering faucet
System Specications
Dimensions: 10.5" H x 5.25" W x 3" D
Product Weight: (model dependent) 2.75 lb/3 lb
Cover: ABS-UL 94 5VA
Color: White
Minimum Operating Pressure: 30 PSI
Maximum Operating Pressure: 150 PSI
Element: Replaceable nichrome cartridge insert
Fittings: 3/8" compression fittings
U.S. Patent Pending Technology
Special Design Service
Inquiries for units for unique applications are welcome. Call our Technical Service
department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax model number SPEX________.
Unit shall have ABS UL 94 5VA rated cover. Unit shall allow mounting in any
orientation. Element shall be replaceable cartridge insert. Element shall be
iron-free, nickel-chrome material. Unit shall have replaceable lter in the inlet
connector. Unit shall include an integrated ow meter to ensure accurate
turn-on / turn-o ow rate. Heater shall be tted with 3/8" compression ttings
to eliminate the need for soldering. Maximum operating pressure of 150 PSI.
Diagnostic features to include LED error/fault indicator. Heater shall employ
technology that engages upon start-up to avoid dry-re occurrence. Hot water
storage tanks prohibited. Unit shall be Eemax or approved equal.
NOTE: Refer to rating chart for product information.
FlowCo
™
Non-thermostatic heater ideal for handwashing and other xed-ow applications
Note: For optimum performance, mounting
location should be within 2 feet of fixture.
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets ANSI/NSF 372
Water Heater
in accordance
with NSF/ANSI
372 MH49688
Features Benefits
Self-diagnostics with intelligent controls
Actively protect heater in installed environment
InfoCue™ visible LED indicator
Communicates system status and heater operation feedback
SafeStart™ technology
Engages upon start-up to help avoid dry-fire occurrence
Mounts in any orientation
Flexible installation
Compact size
Fits almost anywhere; suitable for ADA compliant facilities
Only one cold water line needed for installation
Easy installation
No T&P relief valve needed (check local codes)
Ready to go, right out-of-the-box
Integral 3/8” compression fittings
No sweat connections or soldering required
Control system
Activates heater only on demand
Bare wire technology
Responsive non-thermostatic tankless technology
High temperature limit switch
Enables safe operation
5-year limited warranty on leaks, 1-year on parts
Proven performance