Specification Sheet
Information and product specications contained in this document are subject to change without notice. REV 2020-01
Specications
Tankless Electric Water Heater
Three Phase
™
Triple Module, Commercial/Industrial Thermostatic 3-Phase Heater
Applications
•
Eye/face wash
•
Where tepid water is needed
•
Multiple lavatories
•
Restaurants and other food service requirements
•
Booster applications
•
Manufacturing and wash down processes
•
Commercial and industrial
Performance Features
•
Hot or cold water feed
•
Available electrical models are 480V Delta (ED models) or 208V
Delta (EX models) no neutral leg required
•
Fitted with 1/2" compression ttings and electrical entry on the
bottom
•
Built in over temp protection
•
Flow switch activates heater only on demand (no standby heat
loss)
•
Save water – "Point of use application"
•
Continuous hot water – no storage capacity to run out
•
Factory set temperature available. Range ambient to 180°F
•
Capacity to 5 GPM (T3 only), 4 GPM (T2T)
•
Thermostatic control. Microprocessor provides stable outlet
temperatures
•
Warranty, ve (5) years limited on leaks, one (1) year parts
•
Field serviceable replaceable cartridge element
Optional Features
•
Emergency eye/face wash ANSI Z358.1 (EE)
•
Factory set ambient to 180°F (FS)
•
Multi lavs 0.3 turn on. Staged up to 4 lavs 105°F-110°F temp
setting, aerators supplied (ML)
•
Sanitation 180°F (S)
•
N4, N4X (304SS) enclosures
Product Specications:
Dimensions: 18.25" x 12.25" x 4.5"
Weight: 15 lb
Cover: Powder Coated Steel
Color: White
Element: Triple replaceable Nichrome cartridge elements
insert
Fittings:
1/2" compression ttings at bottom of unit
Min. Dynamic Operating Pressure: 25 PSI
Max. Dynamic Operating Pressure: 150 PSI
U.S. Patent #'s: 4,762,980 and 4,960,976
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax "Three Phase" model
number _________________________.
Element shall be replaceable cartridge insert. Element shall be
iron free, Nickel Chrome material. Heater shall be tted with 1/2"
compression ttings. Heater shall be installed upright with water
connections on bottom. Hot water storage tanks prohibited. Unit
shall be Eemax or approved equal.
NOTE: Refer to rating chart for product information.
Enclosure to be tted with the following features:
_____ EE
Emergency Eyewash. Meets ANSI tepid water
requirements
_____ FS
Factory Set. Customer specied factory-set not to
exceed temperature ambient to 180°F
_____ ML
Multi lavs 0.3 GPM turn on, staged up to 4 lavs
105°F-110°F temp setting, aerators supplied
_____ S
Sanitation. Factory preset not to exceed
temperature of 180°F
_____ N4
NEMA 4 steel cabinet with powder coat nish
_____ N4X NEMA 4 stainless steel, corrosion-resistant cabinet
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
In USA
Assembled
L1
L2
L3
Electrical conguration and requirements
All Eemax three phase units are custom made to order and as such, are non-returnable
and non-refundable. Check your electrical supply, making sure all criteria for operating your
Eemax water heater are met.
Eemax 600V, 480V and 208V
Three Phase Units Delta Conguration
Requires: 3 Lives and 1 Ground (earth)