Electric Tankless and Mini Tank Hot Water Heaters Specification Guide Effective April 2015 No.
Contents Electric Tankless and Mini Tank Hot Water Heaters Specification Guide Effective April 2015 Important Things to Note • Complete submittal packages available for download on eemax.com • All Eemax “Tankless” units are to be hard-wired to the electrical panel box with their own dedicated breaker. • Size ALL Eemax Tankless Water Heaters for required performance, NOT to the existing electrical wiring available. • Temperature settings of the unit are a “high limit not-to-exceed” specification.
Tepid Water Requirement Fact Sheet The American National Standards Institute ANSI Z358.1 requirement for tepid water is 60°F – 100°F for Emergency Eye/Face and Drench Showers. This requirement is a direct response to reduce employers’ liability and increase employee safety. The problem with untempered water is that the minimum recommendation of 15 min to flush hazardous chemicals from contaminated parts of the body is often not met because incoming water temperature can be as low as 35° (2°C).
Eemax Sizing Guide Simple Formula Ensures Proper Size of Electric Tankless Water Heaters A tankless water heater creates hot water on demand. You need a proportional amount of energy or (kW) to heat the flow (GPM) needed/required for your applications. The chart below will help you determine the correct electric tankless water heater, based on flow rate (GPM) and temperature rise.
SafeAdvantage with PhD Technology SafeAdvantage with PhD (Nema 4 Incl.) Specifications Electric Tankless Hot Water Heater For Safety Applications – Eye/Face Wash and Drench Showers Applications • Eye/face wash • Emergency drench showers • Where tepid water is needed Performance Features • Thermo-Optical sensor • Predictive control algorithm • Adjustable turn on • Field programmable & firmware updates • On board diagnostics with digital LCD display U.S.
SafeAdvantage with PhD Technology SafeAdvantage with PhD (Nema 4 Incl.) Specifications Electric Tankless Hot Water Heater For Safety Applications – Eye/Face Wash and Drench Showers Suffix Definitions EE Emergency Eyewash. Shipped with max. temp of 90°F. Shipped with display “Locked.” EFD Emergency Eye, Face & Drench. Shipped with max. temp of 90°F. Must get software update to change temp. Shipped with display “Locked.
SpecAdvantage with PhD For Commercial and Industrial Applications SpecAdvantage with PhD Technology Specifications Electric Tankless Hot Water Heater Applications • Eye/face wash • Emergency drench showers • Where tepid water is needed • Booster applications for sanitation • Commercial kitchen • Process heating • High volume domestic hot water Performance Features • Thermo-Optical sensor • Predictive control algorithm • Adjustable turn on • Field programmable & firmware updates • On board dia
SpecAdvantage with PhD Technology SpecAdvantage with PhD Specifications Electric Tankless Hot Water Heater For Commercial and Industrial Applications Suffix Definitions S Sanitation. Shipped at 180°F with temp range of 100°F-190°F max. EE Emergency Eyewash. Shipped with max. temp of 90°F. Shipped with display “Locked.” EFD Emergency Eye, Face & Drench. Shipped with max. temp of 90°F. Must get software update to change temp. Shipped with display “Locked.
AccuMix Series Specifications Electric Tankless Hot Water Heater Ideal for Sensor or Metering Faucets. UPC 413.1 Code Compliant Performance Features Product Specifications Dimensions: 13.5” H x 5” W x 4” D Weight: 8 lbs.
AccuMix Series Specifications Electric Tankless Hot Water Heater Accumix Ideal for Sensor or Metering Faucets. UPC 413.1 Code Compliant Warning: The temperature of this heater has been Eemax factory set at 105°f for hand washing applications and must not be adjusted. Tampering with any adjustments will void warranty and may cause a loss of compliance to Uniform Plumbing Code 413.1. For further information please contact our technical support department at 1-800-543-6163.
Point of Use “Non-Thermostatic” Specifications Electric Tankless Hot Water Heater Single Point and Flow Controlled (Designed for cold water feed only) Applications SP Version 3/8” compression fittings at TOP of unit Performance Features • On demand hot water. Flow switch activates heater only on demand (no standby heat loss). 99% efficient • Endless hot water – no storage capacity to run out • Easy installation. No T&P relief valve needed (check local codes).
Point of Use “Non-Thermostatic” Specifications Electric Tankless Hot Water Heater Single Point and Flow Controlled (Designed for cold water feed only) TEMPERATURE RISE °F MODEL NUMBER kW AMPS TURN ON RECOMMENDED 0.5 0.75 1.0 1.5 (GPM) WIRE SIZE (CU) GPM GPM GPM GPM Series 1 Single Point and Flow Controlled VOLTS 120 TEMPERATURE RISE °F MODEL NUMBER kW AMPS TURN ON RECOMMENDED 0.5 0.75 1.0 1.5 (GPM) WIRE SIZE (CU) GPM GPM GPM GPM VOLTS 277 C SP2412† 2.4kW 20A 0.
Point of Use “Thermostatic” Specifications Electric Tankless Hot Water Heater Micro Processing Temperature Control Applications • Multi lav configurations (up to three) ideal for sensor or metering faucets (ML option) • Emergency eye wash fountains (EE option) • Dishwashers, commercial kitchens • Low volume showers Performance Features Product Specifications Dimensions: 10.75”x 5.25”x 2.875” Weight: 4 lbs. Cover: ABS UL rated 94Vo. Color: White Std. Temp.
Point of Use “Thermostatic” Specifications Electric Tankless Hot Water Heater Micro Processing Temperature Control TEMPERATURE RISE °F MODEL NUMBER kW TEMPERATURE RISE °F TURN REC’D ON WIRE SIZE 0.5 0.75 1.0 1.5 2.0 AMPS (GPM) (CU) GPM GPM GPM GPM GPM Series 1 Thermostatic VOLTS 120 MODEL NUMBER kW TURN REC’D ON WIRE 0.5 0.75 1.0 1.5 2.0 AMPS (GPM) SIZE (CU) GPM GPM GPM GPM GPM VOLTS 208 Single Phase C EX2412T 2.4kW 20A 0.3 12 AWG 33° 22° 16° 11° 8° C EX3208T 3.0kW 15A 0.
Mini-Tank Series Specifications Electric Mini-Tank Hot Water Heater 1.5, 2.
Mini-Tank Series Specifications Electric Mini-Tank Hot Water Heater 1.5, 2.5, 4 and 6 Gallon Mini Tanks Deliver Hot Water Efficiently Mini Tank Water Heaters Eemax Mini Tank Installation Save water by eliminating the wait for hot water to reach the faucet. Simply tap into the water line and install the heater directly at the sink. No need for costly recirculating lines and pumps.
HomeAdvantage II Specifications Electric Tankless Hot Water Heater For Single Point-of-Use or Multiple Applications Applications • Water-Saver Shower Head • Standard Shower Head • Standard Hand Sink • Kitchen Sink • Bath Tub • Dishwasher • Washing Machine 1.5 GPM 2.0 GPM 0.5 GPM 1 to 2 GPM ≥ 4 GPM 1 to 2 GPM 1 to 1.
HomeAdvantage II Specifications Electric Tankless Hot Water Heater For Single Point-of-Use or Multiple Applications MODEL NUMBER kW AMPS RECOMMENDED TURN ON WIRE SIZE (CU) (GPM) MIN. FLOW (GPM) MAX. FLOW (GPM) TEMPERATURE RISE °F 1.0 GPM 1.5 GPM 2.0 GPM 2.5 GPM 3.0 GPM 4.0 GPM 5.0 GPM 6.0 GPM 240V* 1 MODULES C HA008240 C 8.0 33(1x40)A HA008240 (derated 208V performance) C HA011240 C HA013240 (derated 208V performance) 8 AWG 0.3 0.3 4.8 55° 36° 27° 22° 18° – – – * 0.3 0.
N! O O S ING ProSeries For Single Point-of-Use or Multiple Applications in Commercial Applications COM Applications • Hand washing • Standard Hand Sink • Kitchen Sink or Mop Sink • Dishwasher Specifications Electric Tankless Hot Water Heater 0.5-2.2 gpm 0.5 GPM 4+ GPM 1 to 2 GPM Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards Performance Features • Instant, consistent and endless hot water • Protected internal temperature control • 99.
N! O O S ING ProSeries Specifications Electric Tankless Hot Water Heater For Single Point-of-Use or Multiple Applications in Commercial Applications COM MODEL NUMBER kW AMPS RECOMMENDED TURN ON WIRE SIZE (CU) (GPM) MIN. FLOW (GPM) MAX. FLOW (GPM) TEMPERATURE RISE °F 1.0 GPM 1.5 GPM 2.0 GPM 2.5 GPM 3.0 GPM 4.0 GPM 5.0 GPM 6.0 GPM 240V* 1 MODULES C PRO008240 C 8.0 33(1x40)A PRO008240 (derated 208V performance) 5.8 C PRO011240 C 11.0 46(1x50)A PRO011240 (derated 208V performance) 8.
ProAdvantage Series Specifications Electric Tankless Hot Water Heater Digital Temperature Control for Commercial and Industrial Applications Performance Features • Cut Energy Waste. Flow switch activates heater only on demand (no standby heat loss) 99% efficient • Save Water – “Point of Use” • Continuous Hot Water. No storage capacity to run out • Easy Installation.
ProAdvantage Series Specifications Electric Tankless Hot Water Heater Digital Temperature Control for Commercial and Industrial Applications Product Specifications Single Module Models PA004120T, PA008208T, PA005240T, PA007240T, PA010240T, PA012240T, PA008277T, PA010277T Dimensions: 9.875” H x 5.3” W x 4” D MODEL NUMBER C PA004120T 3.5 C PA008208T C PA005240T Aluminum Powder Coated 25 PSI min. 150 PSI max.
Series Two, Residential/Commercial “TC” Staged models (Two heating modules) with thermostatic control Specifications Electric Tankless Hot Water Heater Applications • Single or Multi fixture • Residential showers • Commercial/Industrial • Photo processing • Adjustable, precise temperature setting +/–1°F (ambient up to 180°F) • Solar backup with FS option Performance Features • Turns on in stages based on hot water demand Min. flow 0.7 GPM, max. flow 3 GPM (ML units turn on 0.
Series Two, Residential/Commercial “TC” Specifications Electric Tankless Hot Water Heater Staged models (Two heating modules) with thermostatic control Suffix Definitions FS ML F actory set ambient to 180°F Multi lavs 0.3 turn on. Staged up to 4 lavs 105°F-110°F temp setting Sanitation 180°F S 10.68 TEMPERATURE RISE °F MODEL NUMBER C EX144TC UTLET .94 INLET 1.41 4.00 ELECTRICAL CONNECTION (2) NEMA 4/4X 16.00 14.50 4XØ .500 MOUNTING HOLES 20.00 Series Two OUTLET INLET 2.80 1.97 4.07 4.
Series Two, Commercial “T2” Specifications Electric Tankless Hot Water Heater Parallel models (Two heating modules) with thermostatic control Applications • Single high volume fixture • Commercial dishwashers • Booster (Solar backup) • Commercial/Industrial • Adjustable, precise temperature setting +/–1°F (ambient up to 180°F) Performance Features • Parallel turn on. Min. flow 1.5 GPM, max. flow 4 GPM • On demand hot water • Continuous hot water.
Series Two, Commercial “T2” Specifications Electric Tankless Hot Water Heater Parallel models (Two heating modules) with thermostatic control Suffix Definitions EE Meets ANSI Z358.1 emergency eye/face wash tepid water requirements Factory set ambient to 180°F Sanitation 180°F FS S 10.68 TEMPERATURE RISE °F MODEL NUMBER kW UTLET .94 INLET 1.41 4.00 ELECTRICAL CONNECTION (2) NEMA 4/4X 16.00 14.50 4XØ .500 MOUNTING HOLES 20.00 Series Two OUTLET INLET 2.80 1.97 4.07 4.00 4.
Series Three, Residential/Commercial Staged or parallel models (Three heating modules) thermostatic control Specifications Electric Tankless Hot Water Heater Applications • Whole house, multi fixture 4 GPM unit has capacity to handle up to two showers at a time • Jetted bathtub booster (T3 option) Performance Features • On demand hot water. Cuts energy waste. No stand-by heat loss. 99% efficiency rating • Thermostatic control.
Series Three Residential/Commercial Specifications Electric Tankless Hot Water Heater For Commercial and Industrial Applications Suffix Definitions T2T Staged heating elements T3 Parallel heating elements EE Meets ANSI Z358.1 emergency eye/face wash tepid water requirements FS Factory set ambient to 180°F ML Multi lavs 0.3 turn on. Staged up to 6 lavs 105°F-110°F temp setting S Sanitation 180°F TEMPERATURE RISE °F MODEL NUMBER kW AMPS RECOMMENDED WIRE SIZE (CU) 2.5 GPM 3.0 GPM 4.0 GPM 5.
Series Four, Residential/Commercial Specifications Electric Tankless Hot Water Heater Staged or parallel models (Four heating modules) thermostatic control Applications • Whole house unit has capacity to handle up to three showers at a time • Multi fixture, 6 GPM max. Performance Features • On demand hot water. Cuts energy waste. No stand-by heat loss. 99% efficiency rating • Thermostatic control.
Series Four, Residential/Commercial Specifications Electric Tankless Hot Water Heater Staged or parallel models (Four heating modules) thermostatic control Suffix Definitions T2T2 Staged heating elements T4 Parallel heating Elements FS Factory set ambient to 180°F S Sanitation 180°F TEMPERATURE RISE °F AMPS RECOMMENDED WIRE SIZE (CU) 38kW 160(4x40)A 8 AWG per module + 86° 27.
Three Phase Series Specifications Electric Tankless Hot Water Heater Triple module, commercial/industrial thermostatic 3-phase heater Applications • Eye/face wash • Where tepid water is needed • Multiple lavatories • Restaurants and other food service requirements • Booster applications • Manufacturing and wash down processes • Commercial and industrial (Representational Image) Performance Features • Hot or cold water feed • Available electrical models are 480V Delta (ED models) or 208V Delta (EX mod
.96 Three Phase Series Specifications Electric Tankless Hot Water Heater Triple module, commercial/industrial thermostatic 3-phase heater Suffix Definitions EE FS ML S Meets ANSI Z358.1 emergency eye/face wash tepid water requirements Factory set ambient to 180°F Multi lavs 0.3 turn on. Staged up to 4 lavs 105°F-110°F temp setting Sanitation 180°F TEMPERATURE RISE °F MODEL NUMBER kW AMPS PER PHASE TURN-ON (GPM) RECOMMENDED WIRE SIZE (CU) 2.0 GPM 2.5 GPM 3.0 GPM 4.0 GPM 5.
De-Ionized, Single Module Stainless steel and engineered plastics for all wetted components Specifications Electric Tankless Hot Water Heater Applications • Microchip manufacturing • Pharmaceutical production • High tolerance component cleaning • Ultrasonic cleaning • Spray rinse tank • Batch chemical mixing Performance Features • Hot or cold water feed.
De-Ionized, Single Module Specifications Electric Tankless Hot Water Heater Stainless steel and engineered plastics for all wetted components “EX” 5.22 3.00 NEMA 4/4X For EX version only. NEMA cabinets not MODEL kW available forNUMBER SP version. VOLTS 120 9.84 7.30 C EX2412T DI 9.67 OUTLET .81 INLET 0.75 GPM 1.0 GPM 1.5 GPM 2.0 GPM 2.4kW 20A 10 AWG 33° 22° 16° 11° 8° 3.0kW 25A 10 AWG 41° 27° 20° 14° 10° C EX3512T DI 3.5kW 29A 10 AWG 48° 32° 24° 16° 12° 3.
De-Ionized, Dual Module Stainless steel and engineered plastics for all wetted components Specifications Electric Tankless Hot Water Heater Applications • Microchip manufacturing • Pharmaceutical production • High tolerance component cleaning • Ultrasonic cleaning • Spray rinse tank • Batch chemical mixing (Representational Image) Quality Features • Hot or cold water feed • Capable of heating high purity water with state of the art materials used in construction, rated for purity levels up to 18 M
De-Ionized, Dual Module Specifications Electric Tankless Hot Water Heater Stainless steel and engineered plastics for all wetted components Suffix Definitions TEMPERATURE RISE °F kW AMPS RECOMMENDED WIRE SIZE (CU) C EX144T2 DI 15kW 64(2x32)A 8 AWG - 65° 51° 34° C EX144TC DI 15kW 64(2x32)A 8 AWG + 65° 51° 34° – C EX190T2 DI 19kW 80(2x40)A 8 AWG - 87° 65° 43° 32° TC Staged heating elements T2 Parallel heating elements MODEL NUMBER 1.0 GPM 1.5 GPM 2.0 GPM 3.0 GPM 4.
De-Ionized, Triple Module Specifications Electric Tankless Hot Water Heater Three phase – 18kW to 32kW and single phase 28kW Applications • Microchip manufacturing • Pharmaceutical production • High tolerance component cleaning • Ultrasonic cleaning • Spray rinse tank • Batch chemical mixing (Representational Image) Quality Features • Hot or cold water feed • Capable of heating high purity water with state of the art materials used in construction, rated for purity levels up to 18 MEG OHM • Prove
De-Ionized, Triple Module Specifications Electric Tankless Hot Water Heater Triple module, commercial/industrial thermostatic 3-phase heater Suffix Definitions T2T Staged heating elements T3 Parallel heating elements TEMPERATURE RISE °F MODEL NUMBER AMPS PER PHASE kW RECOMMENDED WIRE SIZE (CU) 2.0 GPM 3.0 GPM 4.0 GPM 5.
Series Six Commercial Specifications Electric Tankless Hot Water Heater Six module, commercial/industrial for emergency eye/face applications Applications • Commercial/Industrial • Eye/Face combo “Tepid” Water option (EF) Meets ANSI Z358.1 “Tepid” Water Requirements for Emergency Eye/Face wash range of (65°-90°F) • Boosters applications to 180°F (S option) Performance Features • Cut energy waste.
Series Six Commercial Specifications Electric Tankless Hot Water Heater Six module, commercial/industrial for emergency eye/face applications Suffix Definitions T24T Staged Heating Elements T6 Parallel Heating Elements EF Meets ANSI Z358.1 emergency eye/face wash tepid water requirements FS Factory set ambient to 180°F S Sanitation 180°F TEMPERATURE RISE °F MODEL NUMBER kW AMPS PER PHASE TURN ON (GPM) RECOMMENDED WIRE SIZE 4.0 GPM 5.0 GPM 6.0 GPM 7.5 GPM 8.0 GPM 10.0 GPM 12.
Series Twelve Commercial Twelve Module, Commercial/Industrial for Emergency Eye/Face and Drench Showers Specifications Electric Tankless Hot Water Heater Applications • Emergency combination eye/face drench shower (EFD) • Emergency drench shower only (DS) • Where tepid water is needed Performance Features • Cut energy waste.
Series Twelve Commercial Specifications Electric Tankless Hot Water Heater Twelve Module, Commercial/Industrial for Emergency Eye/Face and Drench Showers Suffix Definitions EFD DS F or combination Eye/Face drench shower. First Stage 3 GPM turn on (with reduced power for eye/face wash). Second Stage 15 GPM turn on (full power for drench shower) For drench shower only. (min. turn on 12 GPM) TEMPERATURE RISE °F kW AMPS PER PHASE TURN ON (GPM) RECOMMENDED WIRE SIZE (CU) 3.0 GPM 4.0 GPM 6.0 GPM 7.
Accessories and Replacement Parts Accessories Replacement Parts – Heating Elements MODEL NUMBER DESCRIPTION EX0061-0.5AER EX0061-1.
Accessories and Replacement Parts Continued SpecAdvantage and SafeAdvantage Replacement Parts MODEL NUMBER TRANSFORMERS EX08303-07 FOR USE WITH EX08303-05 EX08303-08 AP036480, AP048480 AP054480, AP072480, AP108480, AP126480, AP144480 AP032208, AP041208, AP054208, AP064208 EX08303-06 AP130600, AP150600 CIRCUIT BOARDS - PHD EX08300-00 Main Control Board - Used on all PhD products EX08601-00 Hall Effects Flow meter board - Used on all PhD products EX78001-00 FUSES EX198 Optical Sensor board assembly in
Terms and Conditions Terms of Sale FOB Shipping Point – Title passes to you once the product is delivered to the carrier. It is your responsibility to inspect each shipment and file a claim with the carrier for any damage or shortages. Freight Terms Available Options: 1. Collect – Eemax ships on your freight account #. 2. P repaid – Eemax arranges shipping and charges you for freight. 3. F ree Freight – Eemax pays freight to a single location in the continental US if your order is $2900.00 or more.
Notes 46 Information and product specifications contained in this document are subject to change without notice.
Notes Information and product specifications contained in this document are subject to change without notice.
To learn more about the full line of Eemax Water Heaters scan the QR code or visit eemax.com 400 Captain Neville Drive Waterbury, CT 06705 (800) 543-6163 info@eemaxinc.com eemax.com The wetted surface of this product contacted by water contains less than 0.25% lead and meets ANSI/NSF 372 NOTE: Certifications may vary based on product lines © 2015 Eemax, Inc. All Rights Reserved.