Product Overview

Series 1
Thermostatic
13
Information and product specifications contained in this document are subject to change without notice.
Applications
• Multi lav configurations (up to three) ideal for sensor or
metering faucets (ML option - 110°F max.)
• Emergency eye wash fountains (EE option - 90°F max.)
• Dishwashers, commercial kitchens
• Low volume showers
Performance Features
• Cut energy waste. Flow switch activates heater only on
demand (no standby heat loss) – 99% efficient
• Save Water – “Point of Use”
• Eliminate costly mixing valves (check local codes)
• Continuous hot water. No storage capacity to run out
• Eliminate lag time in long pipe runs
• Booster up to 180°F (S option)
• Easy installation. Only one cold or hot water line need be
brought to installation – integral compression fittings for 1/2”
pipe (5/8” OD) on bottom (no sweat connections)
• Microprocessor temperature control for thermostatic
accuracy +/-1°F. Fully adjustable temperature range between
100-140°. Special settings of higher or lower range available
upon request. (see Specification Options)
• Reduces installation cost and materials. No T&P relief valve
needed (check local codes)
• Prevents Legionella bacteria growth
• Reduces calcification, liming and sedimentation
• Compact size
• Warranty – Heaters, against failure due to leaks of “Heater
Body/Element Assembly”, five (5) years – Parts, one (1) year
• High temperature limit switch (ECO)
Product Specifications
Dimensions: 10.75”x 5.25”x 2.875”
Weight: 4 lbs.
Cover: ABS UL rated 94V0.
Color: White
Std. Temp. Range 100°F-140°F
Element: Replaceable Ni Chrome cartridge insert
Fittings: 1/2” pipe compression fittings at bottom of unit. (5/8” OD)
UL listed file number: E86887
U.S. Patent #’s: 4,762,980 and 4,960,976
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Point of Use “Thermostatic”
Micro Processing Temperature Control
Specifications
Electric Tankless Hot Water Heater
The wetted surface of this product contacted by water
contains less than 0.25% lead and meets ANSI/NSF 372
Suggested Specification
Tankless water heater shall be an Eemax Thermostatic model
number EX___________.
Unit shall have ABS-UL 94V0 rated cover. Element shall be
replaceable cartridge insert. Unit shall have replaceable filter in
the inlet connector. Element shall be iron free, Nickel Chrome
material. Heater shall be fitted with 1/2” pipe compression
fittings (5/8” OD) on bottom of unit to eliminate need for
soldering. Maximum operating pressure of 150 PSI. Hot water
storage tanks prohibited. Unit shall be Eemax or approved
equal.
Specification options to be included with EX models:
_____ EE Emergency Eyewash. Meets ANSI tepid water
requirements. Max. temperature 90°F
_____ FS Factory Set. Customer specified factory-set not
to exceed temperature ambient to 180°F
_____ ML Multiple Lavatory. Factory preset to 110°F with
0.3 GPM turn on for sensor and metering faucets
_____ S Sanitation. Factory preset not to exceed
temperature of 180°F
_____ N4 NEMA 4 waterproof cabinet w/powder coat finish
_____ N4X NEMA 4 stainless steel waterproof corrosion-
resistant cabinet