Submittal Sheet

ELECTRIC TANKLESS WATER HEATERS
E
ema
X
®
“FLOW CONTROLLED”
MODELS:
Plumbing Spec
Orientation Model Options Volts kW Amps
SP,EX 35 SL,FC 240V* 3.5kW 15A
SP,EX 48 SL,FC 240V* 4.8kW 20A
SP,EX 55 SL,DL,FC 240V* 5.5kW 23A
SP,EX 65 SL,DL,FC 240V* 6.5kW 27A
SP,EX 75 SL,DL,FC 240V* 7.5kW 32A
SP,EX 95 DL,FC 240V* 9.5kW 40A
SP,EX 8208 DL,FC 208V 8.3kW 40A
SP,EX 60 SL,DL,FC 277V 6.0kW 22A
SP,EX 80 DL,FC 277V 8.0kW 29A
SP,EX 90 DL,FC 277V 9.0kW 33A
SP,EX 100 DL,FC 277V 10.0kW 36A
*Units can be used at 208V with 25% reduced output.
MADE IN USA
ADVANCED TECHNOLOGY • HIGHEST EFFICIENCY • DESIGNED FOR DURABILITY
QUALITY FEATURES
• On Demand Hot Water - no delay.
• Cut Energy Waste - flow switch activates heater only on
demand (no standby heat loss). 99% efficient
• Endless Hot Water - no storage capacity to run out.
• Reduces Installation Cost and Material - no T & P relief
valve needed (check local codes).
• Optional Flow Restricting Aerator - ensures proper
temperature rise. (specify flow 0.5 GPM - 2.0 GPM)
• Easy Installation - only one cold water line need be
brought to installation - integral ¹⁄₂” pipe compression
fittings (5/8” OD) at bottom of unit (no sweat connections).
Mounts on wall. ³⁄₈” compression fittings available. Note: SL
• Hands Free Sensor and Metering Faucet Compatible
• Prevents Legionella Bacteria Growth
• Reduces Calcification, Liming and Sedimentation
• Complies with Handicap Requirements
• Ni Chrome Element - a unique, patented flow path ensures
optimum heat transfer and extended element life.
• Field Serviceable Element - replaceable cartridge element
(1 year warranty).
• Compact Size - dimensions 10.75”x5.25”x2.78”;
weight 3 lbs.
• Warranty - Full Factory Warranty - Heaters are guaranteed
against failure due to leaks of “Heater Body/Element
Assembly” for a period of FIVE YEARS.
• High Temperature Limit Switch - protects against element
burn out, with reset button
Multiple Sinks
Low Volume
Hand Shower
(.7 GPM - 2 GPM)
9/06
Kitchen Sink
Pictured, EX: Bottom
Water Connections
APPLICATIONS:
• Kitchen Sinks
• Bar Sinks
• Utility Sinks
• Manufacturing Facilities
• Modular Buildings and Tenant Spaces
• Dual Handwash Sinks (DL)
• Hand Set Shower (0.7-2.0 GPM)
SPECIFICATION OPTIONS:
 SL = Single Lav - 3/8” Adaptor supplied, in line flow
restrictor available. Specify flow rate (.5 GPM to 1 GPM)
 DL = Dual Faucet - two faucet aerators provided
(EX61 .5 GPM or 1 GPM
 FC = Flex Connector - braided stainless steel water
connections
Plumbing Orientation:  SP = Top water connections
¹⁄₂” (⁵⁄₈”OD) compression fittings
 EX = Bottom water connections
¹⁄₂” (⁵⁄₈”OD) compressions fittings
Instant Comfort...Endless Savings