Product Overview

19
Information and product specifications contained in this document are subject to change without notice.
Applications
• Water-Saver Shower Head 1.5 GPM
• Standard Shower Head 2.0 GPM
• Standard Hand Sink 0.5 GPM
• Kitchen Sink 1 to 2 GPM
• Bath Tub ≥ 4 GPM
• Dishwasher 1 to 2 GPM
• Washing Machine 1 to 1.5 GPM
Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards
Performance Features
• Instant, consistent and endless hot water
• Compact, resistant and stylish with digital temperature control
in increments of 1°F ranging from 80°F to 140°F
• 99.8% energy efficient
• Copper immersion heating elements with brass top increases
durability and are threaded for easy replacement
• Simple Installation
• Digital temperature display
• External controls to adjust temperature in increments of 1°F.
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specification
Tankless water heater shall be an Eemax HomeAdvantage II
model number HA_______________.
Unit shall have copper clad immersion heating element(s)
with brass terminations for increased durability. External
temperature control and display adjustable in 1° increments
with a range of 80°-140°F. Display shall be capable of
displaying setpoint temperature in Celsius or Fahrenheit
temperature scales. Unit shall utilize a flow meter with a 0.3
gpm activation point and manage power based on actual
flow rate and inlet temperature. Values should be processed
60 times per second. Unit shall be WQA certified lead free,
certified to UL499 and CSA22.2.
Eemax Inline Flow Restrictor
HomeAdvantage II
For Single Point-of-Use or Multiple Applications
Specifications
Electric Tankless Hot Water Heater
HA008240/HA011240/HA013240 HA018240
HA024240/HA027240
HA036240
The wetted surface of this product contacted by water
contains less than 0.25% lead and meets ANSI/NSF 372
• Enhanced outlet temperature control
• Install on the outlet side of the heater
• Limit maximum volume to the specified flow rate to ensure
exiting temperature is within an acceptable range
• Flow Restrictors for ½” and ¾” plumbing connections
• Restriction range: 0.5 to 5.0 gallons per minute
EEMAX PART NUMBER
GPM RATING OF
INSERTS PROVIDED CONNECTION SIZE
IFR 1-2
1.0, 1.5, 2.0 1/2" Compression
IFR 3-4
2.0, 3.0, 4.0, 5.0 3/4" NPT
COLD CLIMATE
(INLET TEMP. 35-45°F)
WARM CLIMATE
(INLET TEMP. 50-60°F)
HOT CLIMATE
(INLET TEMP. 65-75°F)
HA008240
IFR 1-2 IFR 1-2 IFR 1-2
HA011240
IFR 1-2 IFR 1-2 IFR 1-2
HA013240
IFR 1-2 IFR 1-2 IFR 1-2
HA018240
IFR 3-4 IFR 3-4 IFR 3-4
HA024240
IFR 3-4 IFR 3-4 IFR 3-4
HA027240
IFR 3-4 IFR 3-4 IFR 3-4
HA036240
IFR 3-4 IFR 3-4 IFR 3-4
*Selection based on inlet temperature and an outlet temperature setting of 105°F
Eemax Inline Flow Restrictor Suggested Sizing Guide
HomeAdvantage II
Residential