Specification Sheet

Information and product specications contained in this document are subject to change without notice. REV 2019-02
Specications
Electric Tankless Water Heater
HomeAdvantage II
™
For Single Point-of-Use or Multiple Applications
Applications
• Water-Saver Shower Head 1.5 GPM
• Standard Shower Head 2.0 GPM
• Standard Hand Sink 0.5 GPM
• Kitchen Sink 1 to 2 GPM
• Bath Tub ≥ 4 GPM
• Dishwasher 1 to 2 GPM
• Washing Machine 1 to 1.5 GPM
Average Gallons Per Minute (GPM) based on 2010 Plumbing Standards
Performance Features
• Instant, consistent and endless hot water
• Compact, resistant and stylish with digital temperature control in
increments of 1° ranging from 80°F to 140°F
• Copper immersion heating elements with brass top increases
durability and are threaded for easy replacement
• Simple Installation
• Digital temperature display
• External controls to adjust temperature
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax HomeAdvantage II model
number HA_______________.
Unit shall have copper clad immersion heating element(s) with
brass terminations for increased durability. External temperature
control and display adjustable in 1° increments with a range
of 80°-140°F. Display shall be capable of displaying setpoint
temperature in Celsius or Fahrenheit temperature scales. Unit shall
utilize a ow meter with a 0.3 GPM activation point and manage
power based on actual ow rate and inlet temperature. Values
should be processed 60 times per second. Unit shall be WQA
certied lead free, certied to UL499 and CSA-C22.2 No. 64.
Eemax Inline Flow Regulator
• Enhanced outlet temperature control
• Install on the outlet side of the heater
• Limit maximum volume to the specied ow rate to ensure
exiting temperature is within an acceptable range
• Flow Regulators for ½" and ¾" plumbing connections
• Restriction range: 1.0 to 5.0 gallons per minute
EEMAX PART NUMBER
GPM RATING OF
INSERTS PROVIDED CONNECTION SIZE
IFR 1-2
1.0, 1.5, 2.0 1/2" NPT
IFR 3-4
2.0, 3.0, 4.0, 5.0 3/4" NPT
HA008240/HA011240/HA013240 HA018240
HA024240/HA027240 HA036240
Inlet Water Temperature
40°F 50°F 60°F 70°F
HA008240
IFR 1-2 1.0 1.0 1.0 1.5
HA011240
IFR 1-2 1.0 1.0 1.5 2.0
HA013240
IFR 1-2 1.0 1.5 2.0 2.0
HA018240
IFR 3-4 2.0 2.0 2.0 3.0
HA024240
IFR 3-4 2.0 2.0 3.0 4.0
HA027240
IFR 3-4 2.0 3.0 4.0 5.0
HA036240
IFR 3-4 3.0 4.0 5.0 5.0
Eemax Inline Flow Regulator Suggested Sizing Guide
*
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
*Selection based on inlet temperature and an outlet temperature setting of 105°F
Inserts IncludedIFR 3-4
2.0 GPM 3.0 GPM
4.0 GPM 5.0 GPM
3/4" NPT
Inserts Included
IFR 1-2
2.0 GPM
1.0 GPM 1.5 GPM
1/2" NPT