Specification Sheet
Information and product specications contained in this document are subject to change without notice. REV 2020-01
Specications
Tankless Electric Water Heater
AutoBooster
™
Increase Deliverable Hot Water Capacity of a Tank Water Heater
Applications
• Electric tank in residential & commercial settings
• Gas tank in residential & commercial settings
Performance Features
•
Increase deliverable hot water up to 45%
•
Compact design
•
Set temperature in increments of +/–1°F
•
External controls for adjustable settings
•
Digital user interface
•
Easy installation on new or existing tank water heater
•
No need for additional electrical infrastructure when used with
an existing electric water heater
•
Field replaceable element
•
ETL certied for USA and Canada to UL499
•
Warranty, ve (5) years limited on leaks, one (1) year parts
Product Specications
Dimensions: 8" x 11.5" x 3.75"
Weight: 5.8 lb
Voltage: 240
Power: 7.2 kW
Max. Amperage: 30 A
Recommended Wire Size: 10 AWG (provided)
Outlet Temperature Range: 80-140°F
Min. Dynamic Operating Pressure: 25 PSI
Max. Dynamic Operating Pressure: 150 PSI
Water Connections: Inlet: 3/4" NPT female
Outlet: 3/4" NPT male
U.S. Patent #: US20160178234
Suggested Specication
Water heater shall be an Eemax AutoBooster model number
HATB007240.
Eemax AutoBooster to be connected to a tank water heater
for increased hot water delivery. AutoBooster to utilize existing
electrical infrastructure of electric tank water heater. Water Heater
Booster compatible with gas tank water heater using dedicated 30
amp breaker. AutoBooster to be mounted in horizontal orientation
with inlet on the bottom and outlet on the top. AutoBooster
water connections are Inlet 3/4" FNPT, and outlet 3/4" MNPT.
AutoBooster may be wall mounted if available space is limited.
Dimensions Imperial Metric
A 11.4-in. 290-mm
B 7.9-in. 200-mm
C 9.7-in. 246-mm
D 8.8-in. 224-mm
E 1.0-in. 26-mm
F 2.7-in. 67-mm
G 3.7-in. 94-mm
H 1.6-in. 41-mm
I 1.0-in. 25-mm
J 2.9-in. 74-mm
K 1.0-in. 25-mm
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
B
D
A
G
E
F
I
I
H
K
J
C