Specification Sheet

Specifications
Electric Tankless Water Heater
HotMax
™
with Heat Primed Technology
™
Complete dispensing system providing endless near-boiling water
Applications
• Foodservice
• Coeehouse/café
• Restarurants/kitchens
Performance Features
• Designed for the rigors of commercial foodservice applications
• Provides endless, near-boiling water with no downtime
• Industry leading volume of 480 cups per hour at continuous ow
• Heat Primed Technology™ delivers near-boiling water from rst
cup to last
• Stylish gooseneck dispenser
• Faucet features patent pending SteamShield™ technology
delivering near-boiling water in a steady ow for operator safety
• Splash-free uid dispensing with no undesirable steam
• Temperature consistency of +/- 2°F at steady state
• Broad temperature range of 140°F – 200°F
• Easy-to-adjust temperature control dial with 11 settings
• Recovery-free operation
• Compact size for exible installation
• Faucet easily mounts in standard sink opening
• Warranty, ve (5) years limited on leaks, one (1) year parts
• Certications: NSF 61 Lead Free Certied, ETL certied (U.S. &
Canada)
System Specications
Dimensions: 12"H x 7"W x 5"D
Weight: 6 lb
Cover: Plastic - light texture
Color: Gray
Temperature Range: 140-200°F
Dynamic Operating Pressure: 30-150 PSI
Optimum Operating Pressure: 55-80 PSI
Element: Replaceable brass copper cartridge insert
Inlet Fitting: 3/8” compression fittings
Outlet Fitting: Proprietary - 4mm tube
(1/4" compression fitting)
Turn On: 0.3 GPM
Max Flow Rate: 0.5 GPM (at 60 PSI)
U.S. Patent Pending Technology
Faucet Specications
Height: 11.5"
Surface: Chrome plating, lead free
Min. Rotary Ability: 180°
Outlet Angle Tolerance: +/- 5°
Nut Materials: Plastic PA66 and copper
Lever: Spring return lever
Outlet Flow: Laminar flow stream
U.S. Patent Pending Technology
Information and product specifications contained in this document are subject to change without notice.
Eemax, 400 Captain Neville Drive, Suite 1, Waterbury, CT 06705
[phone] | [e-mail] | www.eemax.com
*The wetted surface of this product
contacted by water contains less
than 0.25% lead and meets NSF 61
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Instant near-boiling water dispensing system shall be an Eemax
HotMax model number HM013240.
Unit shall integrate electric tankless technology with a dispensary
system (faucet) to supply near-boiling water. Unit shall have
a 0.3 GPM turn on. Unit shall be limited to a max ow at 0.5
GPM. Element shall be replaceable copper sheathed with brass
ange cartridge insert. Outlet tting shall include an insulated
4mm tube. Faucet shall deliver water in a laminar ow stream.
Unit shall modulate power to the heating elements to maintain a
user-selected output temperature between 140°F-200°F (subject
to incoming water temperature). The unit shall be equipped with
both computer-controlled and electromechanical auto resetting
thermostat switches for high-limited temperature protection.
The unit shall include a dispensary system that will allow liquid
to pass through internal screen(s) and be shaped into a laminar
ow stream that is conducive to splash-free uid dispensing for
any number of uses. Unit shall employ technology to separate
near-boiling water from undesirable steam- applicable for any
application where the separation of liquid and gas is desired at the
point of dispensing.
• Hotels/hospitality
• Cafeteria