Specification Sheet
Information and product specications contained in this document are subject to change without notice. REV 2020-01
Specications
Tankless Electric Water Heater
ProAdvantage
™
Digital Microprocessing Temperature Control for Commercial and Industrial Applications
Performance Features
•
Cut Energy Waste. Flow switch activates heater only on demand
(no standby heat loss)
•
Save Water – "Point of Use"
•
Continuous Hot Water. No storage capacity to run out
•
Easy Installation. Only one cold or hot water line is needed for
installation – 3/4" NPT water ttings (except single module units
use 1/2" compression ttings)
•
External digital temp control
•
Reduces installation cost and material. No T&P relief valve
needed (check local codes) or venting
•
Warranty, ve (5) years limited on leaks, one (1) year parts
•
Field serviceable replaceable cartridge element
•
Aluminum powder coated exterior
Product Specications
Cover: Aluminum Powder Coated
Temperature Control: Range 100°F-140°F, digital touchpad LED
UL listed le number: E86887
U.S. Patent #'s: 4,762,980 and 4,960,976
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax ProAdvantage model
number PA____________________
Eemax ProAdvantage model, with digital microprocessing
temperature control capable of maintaining outlet temperature.
Element shall be replaceable cartridge insert. Unit shall have
replaceable lter in the inlet connector. Element shall Nickel
Chrome material. Maximum operating pressure of 150 PSI. Hot
water storage tanks prohibited. Unit shall be Eemax or approved
equal.
Single Module Dual Module
Triple Module
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets NSF/ANSI 372
In USA
Assembled