Instructions / Assembly

An Energy-Efficient, Thermostatic Temperature Controlled Tankless Heater For Commercial Applications
353 Christian Street, Oxford, CT 06478
[phone] [e-mail]
eemax.com
SPECIFICATIONS
electric tankless hot water heater
EEMAX PROADVANTAGE UNITS
Single Module Models PA004120T, PA008208T, PA005240T,
PA007240T, PA010240T, PA012240T, PA008277T, PA010277T
Dual Module Models PA014240TC, PA016277TC, PA019240TC,
PA020288TC, PA023240TC
Triple Module Models PA018208T2T, PA024208T2T, PA018277T2T,
PA024277T2T, PA032277T2T Single Phase Model PA028240T2T
QUALITY FEATURES
• Cut Energy Waste - Flow switch activates heater only
on demand (no standby heat loss) 99% efficient.
• Save Water - “Point of Use”.
• Continuous Hot Water – No storage capacity to run out.
• Easy Installation – Only one cold or hot water line is
needed for installation – 3/4” NPT water fittings
(except 1 module units use 1/2” compression fittings).
• Reduces Calcification, Liming and Sedimentation.
• External Digital Temp Control – Delivers desired temp
• Reduces Installation Cost and Material – No T & P
relief valve needed (check local codes) or venting.
• Field Serviceable Element – Replaceable cartridge element
(1 year warranty).
• Warranty – Heaters are guaranteed against failure due to leaks of
“Heater Body/Element Assembly” for a period of FIVE YEARS and
ONE YEAR on parts.
• LEED Credits Available
• Aluminum Powder Coated Exterior
* The wetted surface of this product contacted by water contains less than
0.25% lead and meets California and Vermont Lead Free laws.
N
LEAD
SINGLE MODULE PRODUCT SPECIFICATIONS:
Dimensions: 9.875” H x 5.3” W x 4” D
Weight: 4.5 lbs.
Cover: Aluminum Powder Coated
Operating Pressure: 25 min. PSI, 150 max. PSI
Element: Single replaceable heating cartridge insert
Fittings: 1/2” compression
Temperature Control: Digital touchpad LED, range 100°-140°F
DUAL MODULE PRODUCT SPECIFICATIONS:
Dimensions: 10.5” H x 11” W x 4.5” D
Weight: 10.5 lbs.
Cover: Aluminum Powder Coated
Operating Pressure: 25 min. PSI, 150 max. PSI
Element: Dual replaceable heating cartridge insert
Fittings: 3/4” NPT
Temperature Control: Digital touchpad LED, range 100°-140°F
TRIPLE MODULE PRODUCT SPECIFICATIONS:
Dimensions: 12.5” H x 15.5” W x 4.5” D
Weight: 15 lbs.
Cover: Aluminum Powder Coated
Operating Pressure: 45 min. PSI, 150 max. PSI
Element: Triple replaceable heating cartridge insert
Fittings: 3/4” NPT
Temperature Control: Digital touchpad LED, range 100°-140°F