Spec Sheet
Information and product specications contained in this document are subject to change without notice. REV 2019-02
Specications
Electric Tankless Water Heater
LavAdvantage
™
Thermostatic Heater Ideal for Handwashing and Other Fixed or Variable Flow Applications
Applications
•
Handwashing
•
Kitchen/bar/utility sinks
•
Fixed or variable ow
•
Ideal for multiple sensor or metering faucets
•
Eyewash fountains (EE models - 90°F max)
•
Sanitation (S models - 180°F)
Performance Features
•
Self-diagnostics with intelligent controls actively protect heater in
installed environment
•
SafeStart™ technology engages upon start-up to help avoid
dry-re occurrence
•
Industry's lowest activation with 0.2 GPM turn on ow
•
Digital LED display with accessible user interface communicates
system status and heater operation feedback
•
Silent operation on all models except for SPEX012240T
•
Mounts in any orientation for a exible installation
•
Compact size ts almost anywhere; suitable for ADA compliant
facilities
•
Only one input line, hot or cold, needed for an easy installation
•
Designed to deliver hot water to a single pipe faucet, mixing
valves or mixing faucets
•
Integral 3/8" compression ttings; no soldering or sweat
connections required
•
No T&P relief valve needed (check local codes); Ready to go,
right out-of-the-box
•
Save water and time by installing unit at the point-of-use
•
Control system activates heater only on demand
•
High temperature limit switch enables safe operation
•
Active energy management with power modulation allows for
thermostatic accuracy
•
5-year limited warranty on leaks, 1-year on parts
Product Specications
Dimensions: 9.75" x 5.25" x 3"
Weight: 4 lb
Cover: ABS-UL rated 94 V-0
Color: White
Adj. Temperature Range: 70°F-140°F*
Min. Dynamic Operating Pressure:
35 PSI
Max. Dynamic Operating Pressure: 150 PSI
Element: Replaceable Nichrome cartridge insert
Fittings: 3/8" compression ttings
UL listed le number: E86887
U.S. Patent #'s: 4,762,980 and 4,960,976
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax LavAdvantage model
number SPEX___________.
Unit shall have ABS-UL 94 V-0 rated cover. Unit shall have 0.2
GPM turn on. Unit shall allow mounting in any direction. Element
shall be replaceable cartridge insert. Unit shall have replaceable
lter in the inlet connector. Element shall be iron free, Nickel
Chrome material. Tankless water heater to utilize complex
algorithm, actively managing power application to real time
system demand. Integrated ow meter, along with inlet and outlet
temperature sensors provide data which allows the unit to instantly
adapt to variations in input parameters. Heater shall be tted with
3/8" compression ttings to eliminate need for soldering. Maximum
operating pressure of 150 PSI. Accessible diagnostic features to
include error/fault display. Hot water storage tanks prohibited. Unit
shall be Eemax or approved equal.
Tankless water heater user interface must have the following
capabilities:
•
Selectable display including Celsius /Fahrenheit, setpoint, ow
rate, inlet temperature outlet temperature, power factor
•
Capable of displaying ow rate in gallons per minute & liters per
minute
•
Diagnostic features to include error/fault display
•
Control board must maintain error/fault history of 5 events
Specication options to be included with SPEX models:
_____ EE
Emergency Eyewash. Meets ANSI tepid water
requirements. Factory set to 90°F. Max temp. 90°F.
_____ ML
Multiple Lavatory. Factory set to 110°F. Max
temp. 110°F
_____ S Sanitation. Factory set to 120°F. Max temp. 180°F.
_____ N4 NEMA 4 steel cabinet with powder coat nish
_____ N4X NEMA 4 stainless steel, corrosion-resistant cabinet
Note: For optimum performance, mounting location should be located within 2 feet of xture.
Tested and certied by the
Water Quality Association
against NSF/ANSI 372 for
lead free compliance.
*Special settings available, see specication options