Product Overview

Specifications
Electric Tankless Water Heater
Information and product specifications contained in this document are subject to change without notice.
Eemax, 400 Captain Neville Drive, Waterbury, CT 06705
[phone] | [e-mail] | www.eemax.com
Applications
• Handwashing
• Kitchen/bar/utility sinks
• Fixed-ow
• Designed for a single sensor faucet or meter faucet
Performance Features
• Self-diagnostics
• Intelligent controls
• InfoCue - visible LED indicator
• SafeStart™ technology
• Mounts in any orientation
• Compact size
• Only one cold water line needed for installation
• No T&P relief valve needed (check local codes)
• Integral 3/8" compression ttings
• Control system activates heater only on demand
• Bare wire technology
• High temperature limit switch (ECO - automatic energy cut-o)
• Low activation ow starting at 0.25 GPM turn on (model
dependent)
• Warranty, ve (5) years limited on leaks, one (1) year parts
Benets
• Endless hot water – no storage capacity to run out
• Fits almost anywhere; suitable for ADA compliant facilities
• Save water and time by installing unit at point-of-use to eliminate
long pipe runs
• Reduces installation cost and materials
• Cut energy waste (no standby heat loss)
• No venting
• Purge technology engages upon start-up to avoid dry-re
occurrence
• Easy, exible installation
• Ready out of the box
• Over temperature protection
• Real-time response to ow
• Operation feedback via an intuitive LED indicator
• Blinking patterns indicate system status
System Specications
Dimensions: 10.5" H x 5.25" W x 3" D
Product Weight: (model dependent) 2.75 lb/3 lb
Cover: ABS-UL 94 5VA
Color: White
Minimum Operating Pressure: 30 PSI
Maximum Operating Pressure: 150 PSI
Element: Replaceable nichrome cartridge insert
Fittings: 3/8" compression fittings
U.S. Patent Pending Technology
Special Design Service
Inquiries for units for unique applications are welcome.
Call our Technical Service department at 1-800-543-6163.
Suggested Specication
Replace suggested spec text on PDF w/ the following:
Tankless water heater shall be an Eemax model number
SPEX________.
Unit shall have ABS UL 94 5VA rated cover. Unit shall allow
mounting in any orientation. Element shall be replaceable cartridge
insert. Element shall be iron-free, nickel-chrome material. Unit
shall have replaceable lter in the inlet connector. Unit shall include
an integrated ow meter to ensure accurate turn-on / turn-o
ow rate. Heater shall be tted with 3/8" compression ttings to
eliminate the need for soldering. Maximum operating pressure of
150 PSI. Diagnostic features to include LED error/fault indicator.
Heater shall employ technology that engages upon start-up to
avoid dry-re occurrence. Hot water storage tanks prohibited. Unit
shall be Eemax or approved equal.
NOTE: Refer to rating chart for product information.
FlowCo
™
Point-of-use non-thermostatic heater- Ideal for handwashing and xed-ow applications
*The wetted surface of this product
contacted by water contains less than
0.25% lead and meets ANSI/NSF 372
Note: For optimum performance, mounting
location should be within 2 feet of fixture.
Water Heater
in accordance
with NSF/ANSI
372 MH49688