Spec Sheet

Information and product specications contained in this document are subject to change without notice. REV 2019-02
Specications
Electric Tankless Water Heater
FlowCo
™
Non-Thermostatic Heater Ideal for Handwashing And Other Fixed-Flow Applications
Note: For optimum performance, mounting location should be within 2 feet of xture.
Applications
• Handwashing
• Kitchen, bar, utility sink
• Point-of-use & xed-ow xture
• One (1) lavatory faucet, sensor faucet or metering faucet
Performance Features
• Self-diagnostics with intelligent controls actively protect heater in
installed environment
• InfoCue™ visible LED indicator communicates system status
and heater operation feedback
• SafeStart™ technology engages upon start-up to help avoid
dry-re occurrence
• Low activation ow starting at 0.25 GPM turn on
(model dependent)
• Mounts in any orientation for a exible installation
• Compact size ts almost anywhere; suitable for ADA compliant
facilities
• Only one cold water line needed for an easy installation
• No T&P relief valve needed (check local codes); Ready to go,
right out-of-the-box
• Save water and time by installing unit at the point-of-use
• Integral 3/8" compression ttings; no soldering or sweat
connections required
• Control system activates heater only on demand
• High temperature limit switch enables safe operation
• 5-year limited warranty on leaks, 1-year on parts
Product Specications
Dimensions: 10.5" H x 5.25" W x 3" D
Product Weight: (model dependent)
2.75 lb/3 lb
Cover: ABS-UL 94 V-0
Color:
White
Minimum Operating Pressure: 30 PSI
Maximum Operating Pressure: 150 PSI
Element:
Replaceable nichrome cartridge insert
Fittings: 3/8" compression ttings
UL listed le number: E86887
U.S. Patent Pending Technology
Special Design Service
Inquiries for units for unique applications are welcome. Call our
Technical Service department at 1-800-543-6163.
Suggested Specication
Tankless water heater shall be an Eemax model number
SPEX________.
Unit shall have ABS-UL 94 V-0 rated cover. Unit shall allow
mounting in any orientation. Element shall be replaceable cartridge
insert. Element shall be iron-free, nickel-chrome material. Unit
shall have replaceable lter in the inlet connector. Unit shall include
an integrated ow meter to ensure accurate turn-on / turn-o
ow rate. Heater shall be tted with 3/8" compression ttings to
eliminate the need for soldering. Maximum operating pressure of
150 PSI. Diagnostic features to include LED error/fault indicator.
Heater shall employ technology that engages upon start-up to
avoid dry-re occurrence. Hot water storage tanks prohibited. Unit
shall be Eemax or approved equal.
NOTE: Refer to rating chart for product information.
Specication options to be included with SPEX models:
_____ N4
NEMA 4 steel cabinet with powder coat nish
_____ N4X NEMA 4 stainless steel, corrosion-resistant cabinet
Tested and certied by the
Water Quality Association
against NSF/ANSI 372 for
lead free compliance.