Specification Sheet

Circuit diagram
PCM
Projection:
Page:
Scale:
Unit:
1/1
1 : 1
mm
EEMB BATTERY
R
E4-2009
Revise No.:
PCM
Ni-Tap
(镍带)
Adhesive tape
(绝缘胶布)
Cell(电芯):LP103395
with date code(喷码)
Wire引线:black黑(-)
UL1571 AWG24
Adhesive tape Kapton
(金手指)
Wire引线:red红(+)
UL1571 AWG24
LP103395
Model:
Nominal Voltage 标称电压(V)
Battery protection
Related Value:
(相关的电池保护值)
Overdischarge Detection Voltage(V)
过放保护电压(V)
Overcharge Detection Voltage(V)
过充保护电压(V)
Internal impedance 内阻(≦)
(mΩ,AC 1KHZ)
3.7
Battery pack
specification
(电池组规格)
Min.Capacity 最低容量(mAh)
(0.2C,25±3°C)
Typical Capacity 典型容量(mAh)
(0.2C,25±3°C)
Ambient
Conditions
(环境温度)
Charge Temp.充电温度(°C)
Discharge Temp.放电温度(°C)
Humidity(湿度)
65±20%
-20~60
0~45
Limited to Max loading current
仅用于最大的负载电流
peak value (A)
峰值_____(A)
constant (A)
持续_____(A)
Customer required Max loading current
客户要求最大的负载电流
peak value (A)
峰值_____(A)
constant (A)
持续_____(A)
If actual application loading current is bigger than EEMB suggested,
please indicate.The application profile is important for an approp-
riate PCM design.
(如果实际应用的负载电流大于 EEMB提供值,请提出来.实际的应用
情况对PCM的设计至关重要）
Remark(备注):
1. No scratch,distoration,discoloration and leakage on the appearance of the cell(电池表面无划痕、变形、污点及漏液等现象 ).
2. Rohs compliant(严格按照ROHS要求生产).
3700
4.28±0.05
3.0±0.1
3500
160
2
3
Connector(插头):
JST-PHR-0200
YanF
2019/04/18
Group:
Drawn:
Draw Date:A17027
LP103395-PCM-LD/
File NO.
Title
Group16
Approved2:
Approved1: