Instruction Manual

June 2012 PART NO. Y017 Page 16 of 90
Series 433 Tri
p
le Set Installation Instructions
SECTION III: Fabrication
B. Drilling Template Offset Shear Block Verticals (Offset Mullion Filler)
Left Hand Mullion Shown, Right Hand Opposite
Use the exterior edge of the vertical to align Drill Jig DJ14. Use .182 dia. (#14) drill at
darkened areas only.
These preps work for both inside and outside glazed versions.
Outside Set Mullion Fille
r
Inside Set Mullion Filler
DJ14DJ14
OFF SET
CENTER SET
CENTER SET
CENTER SET
OFF SET
CENTER SET
433 S.B.
433 S.B.
OFF SET
DJ14
CENTER SET
CENTER SET
433 S.B.
433 S.B.
CENTER SET
OFF SET
DJ14
CENTER SET
DJ14
CENTER SET
CENTER SET
OFF SET
433 S.B.
433 S.B.
CENTER SET
CENTER SET
OFF SET
DJ14