User Guide

ManualsBrandsEFD ManualsOther736HPA

Introduction

The 736HPA is a normally closed, air-actuated, balanced

spool-type valve designed to operate at fluid pressures

up to 2,500 psi (172 bar). Ideal for consistent dispensing

of industrial sealants and greases, the 736HPA valve is

simple to use and will operate many millions of cycles

without wear or leakage.

A NORDSON COMPANY

736HPA High Pressure

Dispense Valve

INSTALLATION GUIDE

Dispensing tip

Fluid inlet fitting

Air cylinde

body

Control air hose

Fluid supply line

USA: 800-556-3484 or +1-401-434-1680

Europe: 0800 585733 or +44 (0) 1582 666334

Asia: +86 (21) 5854 2345

technical@efd-inc.com www.efd-inc.com

Electronic pdf files of EFD

manuals are also available at

www.efd-inc.com/manuals.html.

Summary of content (4 pages)

PAGE 1
736HPA High Pressure Dispense Valve INSTALLATION GUIDE ® A NORDSON COMPANY Electronic pdf files of EFD® manuals are also available at www.efd-inc.com/manuals.html. USA: 800-556-3484 or +1-401-434-1680 Europe: 0800 585733 or +44 (0) 1582 666334 Asia: +86 (21) 5854 2345 technical@efd-inc.com www.efd-inc.com Control air hose Introduction Fluid supply line The 736HPA is a normally closed, air-actuated, balanced spool-type valve designed to operate at fluid pressures up to 2,500 psi (172 bar).
PAGE 2
r ut Air Output Installation Exhaust Prior to installing this valve, please read the associated reservoir and valve controller operating instructions to become familiar with the operation of all components of the dispensing system. Time Set 1. Mount valve with an EFD universal Test Clear Fast Slow POWER valve mount (#7002VM) or other fixture. 2.
PAGE 3
How the Valve Operates When air pressure at 70 psi (4.8 bar) is applied, the piston shifts the spool ➀ to the open position, allowing fluid to flow. At the end of the cycle, spring force on the piston ➁ shifts the spool to the closed position, stopping fluid flow. During the closing action, the 736HPA provides snuff-back of fluid for clean cutoff. The stroke adjustment ➂ can be used to regulate snuff-back to an amount appropriate for the fluid being dispensed.
PAGE 4
Specifications ValveMate Concept General The ValveMate 7000 provides easy adjustment of valve open-time for maximum end-user convenience and efficiency. Valve open-time is the primary control of deposit size. The 7000 puts push-button adjustment of valve open-time where it needs to be – at the valve location. Size: 116.1 mm length x 34.9 mm diameter (4.57” x 1.375” ) Weight: 18.