SpeedStream 5800 Series Business Class Routers Quick Start Guide P/N: 222-00803-02
Copyright 2000, Efficient Networks, Inc. All rights reserved. Printed in the U.S.A. Product names mentioned herein may be trademarks and/or registered trademarks of their respective companies. Efficient Networks, Inc. shall not be liable for technical or editorial errors or omissions in this document; nor for incidental or consequential damages resulting from the furnishing, performance, or use of this material. Efficient Networks, Inc.
Software License The Software is protected by copyright laws and international copyright treaties. The Software is licensed and not sold to you. Accordingly, while you own the media (CD ROM or floppy disk) on which the Software is recorded, ENI retains ownership of the Software itself. 1. Grant of License. You may install and use one (and only one) copy of the Software on the computer on which the Hardware is being installed.
4. Upgrades Covered. This license covers the Software originally provided to you with the Hardware, and any additional software that you may receive from ENI, whether delivered via tangible media (CD ROM or floppy disk), down loaded from ENI or delivered through customer support. Any such additional software shall be considered "Software" for all purposes under this License. 5. Export Law Assurances. You acknowledge that the Software may be subject to export control laws and regulations of the U.S.A.
Limited Warranty ENI provides the following limited warranties to the original end-user of the Hardware and Software: 1. Hardware. Efficient warrants that the Hardware will be free from defects in materials and workmanship and will perform substantially in compliance with the user documentation relating to the Hardware for a period of one year from the date the original end user received the Hardware. 2. Software.
4. Warranty Procedures. Prior to returning a product under this warranty, the end user must first call ENI at (408) 878-6803, or send an email to ENI at support@efficient.com to obtain a return materials authorization (RMA) number. RMAs are issued between 8:00 a.m. and 5:00 p.m. Pacific Standard Time, excluding weekends and holidays. The end user must provide the serial number(s) of the products in order to obtain an RMA.
5. Limitations. The limited warranty does not apply to any damage or failure caused by misuse, abuse, acts of nature, accidents (for example dropping or spilling fluids on the Hardware), or the like.
General Provisions The following general provisions apply to the foregoing Software License and Limited Warranty: 1. No Modification. No oral or written information or advice given by ENI or its dealers, distributors, employees or agents shall in any way extend, modify or add to the foregoing Software License and Limited Warranty.
ACTION, WILL BE LIMITED TO, AND SHALL NOT EXCEED, THE AMOUNT PAID FOR THE HARDWARE/SOFTWARE. 3. General. This Software License and Limited Warranty will be covered by and construed in accordance with the laws of the State of Texas, and shall inure to the benefit of ENI and its successor, assignees and legal representatives.
Table of Contents Introduction..................................................................10 Installation Requirements ............................................11 Connecting Your Router ..............................................13 Configuring Your Router .............................................15 Administration .............................................................16 Web User Interface ......................................................17 Easy Setup...............................
SpeedStream 5800 Business Class Routers Introduction This Quick Start Guide covers basic installation and setup of the SpeedStream 5800 Series Business Class Routers including: • • • • 10 5851 Symmetric Digital Subscriber Line router (SDSL) 5861 Asymmetric DSL / Discrete Multi Tone router (DMT) 5865 Asymmetric DSL / DMT (international) router 5871 Integrated Services Digital Network DSL router (IDSL) Introduction
SpeedStream 5800 Business Class Routers Installation Requirements PC Requirements • • • • • CD-ROM Drive Ethernet network interface card TCP/IP network protocol installed Web browser Terminal emulation software if you want to configure your router via your computer’s serial port before placing it into service on a network.
SpeedStream 5800 Business Class Routers Network Options Bridging and/or • • • • IP Routing (requires a WAN IP address and subnet mask) VPI/VCI (PVC) numbers, or DLCI for frame relay DNS address One or more LAN IP addresses and a subnet mask Package Contents Your package should contain the items listed below. If you determine anything to be damaged or missing, please contact the dealer from whom the equipment was purchased.
SpeedStream 5800 Business Class Routers Connecting Your Router Place your router in a location where it will be well ventilated. Do not stack it with other devices or place it on carpet. After ensuring that the power switch on the back of the router is switched off, connect the router to an AC power outlet using the power cord. Connect your PC directly to any of the router’s four Ethernet ports using a straight through cable (red label).
SpeedStream 5800 Business Class Routers The following diagram shows the router when connected: CONSOLE 14 Connecting Your Router
SpeedStream 5800 Business Class Routers Configuring Your Router Your computer will be obtaining IP addresses automatically from the router. Configure the TCP/IP stack on your PC to obtain an IP address automatically. To do so with a PC running Windows 9x or NT, select Start > Settings > Control Panel > and click on Network. Select TCP/IP from the list of components and select Properties. Select the IP Address tab and verify the selection to Obtain an IP Address Automatically. Click OK as needed.
SpeedStream 5800 Business Class Routers Administration At the login prompt, make the following entries: User Name: login Password: admin Change Password After you have logged into your router, a dialog will appear, prompting you to change your password. Failure to change the password from the factory default creates a security risk. It is strongly recommended that you change the default password.
SpeedStream 5800 Business Class Routers Web User Interface Your SpeedStream 5800 Series Router includes a Web User Interface to provide you with easy-to-use controls and information. The Web User Interface consists of simple, linked forms that together provide clear views of your router settings and status. You can use these forms to understand and control essential router functions. Router Configuration Page The first page in the Web User Interface is the Router Configuration Page.
SpeedStream 5800 Business Class Routers 18 Web User Interface
SpeedStream 5800 Business Class Routers Easy Setup Easy Setup is a set of web forms designed to provide a quick and easy setup of your router. Easy Setup is a permanent feature, accessible from any computer platform with a web browser. Easy Setup can assist you in getting your router up and running with a basic configuration. The choices you make in the Easy Setup forms are based on information about your LAN (Local Area Network) and information from your Network Service Provider.
SpeedStream 5800 Business Class Routers Wide Area Network Interface The first Easy Setup screen is for entering and reviewing information about Wide Area Network (WAN) settings. Your Network Service Provider can provide you with the information needed to correctly complete these WAN settings. If your interface is ATM-based, enter the VPI/VCI numbers. If your interface is Frame Relay based, enter the DLCI numbers.
SpeedStream 5800 Business Class Routers Easy Setup 21
SpeedStream 5800 Business Class Routers Point-to-Point Protocol If you have selected PPP as your WAN protocol, you will see a screen requesting a PPP User Name and PPP Password. Enter this information in the fields provided. PPP Networking Bridging will forward all traffic to remote hosts that is not routed (nonIP) to the WAN. • • • IP Routing will route all IP packets for remote hosts to the WAN.
SpeedStream 5800 Business Class Routers Easy Setup 23
SpeedStream 5800 Business Class Routers RFC 1483 or 1490 Networking If you have selected RFC 1483 (or RFC 1490 for frame relay) as your WAN protocol, you will see a screen for selecting networking options, and for setting IP routing configurations. You can configure IP routing automatically using DHCP, or manually by providing a WAN IP address and subnet mask. The WAN IP address and subnet mask define the IP address and network of the WAN interface.
SpeedStream 5800 Business Class Routers .
SpeedStream 5800 Business Class Routers RFC 1483 or 1490 MER If you have selected RFC 1483 (or 1490 for frame relay) MER as your WAN protocol, you will see a screen for selecting networking options, and for setting IP routing configurations.
SpeedStream 5800 Business Class Routers Easy Setup 27
SpeedStream 5800 Business Class Routers Dynamic Host Configuration Protocol DHCP dynamically assigns IP configuration information to PCs on the LAN automatically, thus avoiding the need to set IP configuration for each PC manually. You can enable DHCP by clicking on the indicated checkbox. Domain Name Service (DNS) maps host names to IP addresses. DNS is performed by Domain Name Servers. The domain name identifies the default name for the network.
SpeedStream 5800 Business Class Routers Easy Setup 29
SpeedStream 5800 Business Class Routers Local Area Network Configuration The final screen in Easy Setup is for Local Area Network (LAN) IP configuration. The IP address is the network address of your router. This address must be globally unique, unless NAT has been enabled. The Subnet Mask is used along with the IP address to determine if specific LAN IP traffic should be forwarded to the WAN.
SpeedStream 5800 Business Class Routers Easy Setup 31
SpeedStream 5800 Business Class Routers Click Save and Reboot to save your settings in Easy Setup. Your router will reboot with the new configuration settings.
SpeedStream 5800 Business Class Routers Easy Setup 33
SpeedStream 5800 Business Class Routers Access Control This feature restricts adminstrative access and control of the router to a select group of hosts. In this form, you can select which router services can be accessed from PCs. For each selected service, you can restrict the hosts that can manage the service remotely.
SpeedStream 5800 Business Class Routers Access Control 35
SpeedStream 5800 Business Class Routers Feature Activation There are several optional software features available for your router, such as L2TP, IPSec, DES encryption, and 3DES encryption. These features can be purchased from the Efficient Networks web site (www.efficient.com). For each optional feature purchased, you will be emailed a feature activation key. Feature activation keys are used to enable additional features on your router.
SpeedStream 5800 Business Class Routers Feature Activation 37
SpeedStream 5800 Business Class Routers Change Password Changing your administration password is easy. Simply type your new password into each of the fields. The new password is also required in the second field for verification. Once the passwords are entered in both fields, click the Save button. Your new password is now effective.
SpeedStream 5800 Business Class Routers Change Password 39
SpeedStream 5800 Business Class Routers Setting The Date and Time This feature enables you to set the date and time on your router. The current date and time from your workstation is displayed in the field labeled Current Date and Time. To synchronize the router date and time with the current date and time displayed, click on the Synchronize Router Clock button.
SpeedStream 5800 Business Class Routers Setting The Date and Time 41
SpeedStream 5800 Series Router Panel Descriptions Front Panel Six lights appear on the front left panel of the router.
SpeedStream 5800 Series Router Table 1: Front Light Indications Light Indications PWR Green:Power is on Off:Power is off TEST Amber:Running Power On Self Test Green:Router Power On Self Test successful Off:Router is shut down LINK Amber:Establishing DSL modem link Green:DSL Modem Link Successful Off:DSL modem link is shut down WAN Green flashing:WAN transmissions detected Off:No WAN trensmissions detected LANT Green flashing:Transmitting LAN traffic Off:Not transmitting LAN traffic LANR Green
SpeedStream 5800 Series Router Back Panel CONSOLE From left to right, back panel connections are as follows: Table 2: Back Panel Connections Connection Function Power Uses an on/off power switch and a standard AC power cord. DSL WAN Connection A 6 pin, RJ-14 or RJ-45 port connects DSL. Ethernet Ports Four Ethernet 10Base-T ports (8 pin, RJ-45) are in a built-in hub. Reset Pin This is rarely needed and should only be used as instructed by Technical Support.
SpeedStream 5800 Business Class Routers Hardware Specifications Physical Specifications • • • Dimensions: Weight: 8.4 W x 7.0 D x 1.7 H inches 21.3 W x 17.8 D x 4.3 H cm 1.5 lbs. / 68 Kg.
SpeedStream 5800 Business Class Routers LAN Interface • • Built-in four port Ethernet hub with four RJ-45 connectors LAN speed up to 10 Mbps WAN Interface • One Digital Subscriber Line interface (RJ-14 for models 586X) RJ14 Line A / Line B Pinning 2/5 or 3/4 or RJ-45 Agency Approvals • • • • • • • 46 CE Mark TUV Safety: UL 1950, CSA 22.
SpeedStream 5800 Business Class Routers Modem Specifications DMT/ADSL • Up to 8 Mbps downstream • Up to 1 Mbps upstream • Supports full rate G. DMT (G.992.1), G.lite (G.992.2), G. HS (G.994.1), mgmt (G.997.1) and ANSI T1.
SpeedStream 5800 Business Class Routers Port Specifications Table 3: Ethernet & Console Pin Ethernet Port Console Port 1 Twisted pair transmit + Receive data 2 Twisted pair transmit - Request to send 3 Twisted pair receive + Not connected 4 Ground Transmit data 5 Ground Ground 6 Twisted pair receive - Clear to send 7 Ground Not connected 8 Ground Ring indicator 48 Port Specifications
SpeedStream 5800 Business Class Routers Table 4: WAN Port - Most Models (RJ-45) Pin Most Models 1 Not connected 2 Not connected 3 Not connected 4 Tip or Line A 5 Ring or Line B 6 Not connected 7 Not connected 8 Not connected Port Specifications 49
SpeedStream 5800 Business Class Routers Table 5: WAN Port - Models 586X DMT Routers (RJ-14) Pin 120-5861-001 120-5861-002 120-5865-001 1 Not connected Not connected 2 Tip or Line A Not connected 3 Not connected Tip or Line A 4 Not connected Ring or Line B 5 Ring or Line B Not connected 6 Not connected Not connected 50 Port Specifications
SpeedStream 5800 Business Class Routers Software Specifications Bridging • • Transparent bridging including Spanning Tree Protocol (IEEE 8021D) Bridge filters Routing • • • • • • TCP/IP with RIP 1 (RFC 1058), RIP 1 compatible and RIP 2 (RFC 1389), or static routing on the LAN and/or WAN Novell® IPX with RIP/SAP (RFC 1552) DHCP Server - Automatic assignment of IP address, mask, default gateway, and DNS server addresses to workstations (RFC 2131, RFC 2132) DHCP Client (RFC 2132) DHCP Relay Agent (RFC 154
SpeedStream 5800 Business Class Routers • Spoofing and filtering (IP-RIP, IPX-RIP, SAP, Watchdog, serialization) IP Address Translation • • • Network renumbering (RFC 1631) Network Address Translation (NAT/PAT) LAN servers supported with NAT Configuration Management • • • • • • • • • Easy Setup with Web browser based graphical user interface Windows Quick Start program for easy setup Administration through HTTP, SNMP, Telnet or VT100 terminal TFTP download/upload of new software, configuration files,
SpeedStream 5800 Business Class Routers Asynchronous Transfer Mode (ATM) • • • • • • • Encapsulation (IP, bridging, and encapsulated routing) (RFC 1483) PPP over ATM (LCC and VC multiplexing) (RFC 2364) Classical IP (RFC 1577) AAL5 Multiple Virtual Circuits (VCs) Virtual Circuit (VC) traffic shaping (UBR, VBR, CBR) 1.
SpeedStream 5800 Business Class Routers • • • 54 HTTP/SNMP/Telnet/Syslog access control list Firewall (IP filtering) Optional VPN software (L2TP, IPSec, IKE, DES, 3DES) Software Specifications
SpeedStream 5800 Business Class Routers Support For specific product support, contact the organization that provided or sold the equipment to you. If you need to contact your NSP for technical support, please have the following information ready: • • • • • Router model number (on the bottom of the router) Router software version (displayed in the Web interface) Date of purchase OS Type (e.g.
SpeedStream 5800 Business Class Routers Compliances Section 15.105(b) of the Code of Federal Regulations: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant of Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SpeedStream 5800 Business Class Routers Caution: Any changes or modifications not expressly approved by the party responsible for this device could void the user’s authority to operate this equipment. Canadian D.O.C. Notice This product conforms to Canadian Class B emmisions regulations. Ce produit se conforme aux réglements d’émission canadienne classe B.