- Siemens Hearing Aid User Manual

26 Siemens Hearing Instruments
Using the telephone
CENTRA S and CENTRA S VC hearing instruments
are equipped with a T-coil (telecoil) for telephone
use. It may be programmed to work in a specific
listening program in conjunction with the
memory button. In the T-coil mode, place the
telephone receiver close to your hearing
instrument for best reception. By trying
various positions of the telephone receiver, you
will discover what works best for you.
Your Audiologist or Hearing Care Provider can
advise you on the proper use of the T-coil and all
hearing instrument settings.
Note: In order for the telecoil to function properly,
your telephone must be "hearing aid compatible."
Check your telephone’s instruction manual to find
out whether your phone has this capability.
If you are using an ePocket remote control, be sure
to change your listening program out of T-coil mode
before using the "Data Read Out" function. Using the
"Data Read Out" function while in T-coil mode will
cause a loud pulsing noise to be heard, due to
pickup of the transmission signal of the T-coil.