Model No. EFL-0622WHT 6.2inches VGA LCD Monitor Customer’s logo display on Booting is available - Hitachi TFT LCD Panel - Wide Viewing Angle, High Speed Response - Automatic Scanning - Enhanced Video Quality - Power Supply with enhanced Design Margin - Test Pattern for Burn-in & Self Check Model No. : EFL-0622WHT Approval No.: 6.2-HIT-STD Engineering Specification Revision No.: 1.0 Page : 1 of 9 Issue Date: Jul. 11.
Table of Contents 1. GENERAL DESCRIPTION .............................................................................3 1-1. Overview ........................................................................................................................................3 1-2. FCC RF Interference Statement…………………………………………………………………. 3 1-3. Quick reference table of Characteristics ........................................................................................4 2. USER CONTROL & OSD ..................
1. GENERAL DESCRIPTION 1-1. Overview Effinet open frame LCD Monitor EFL-0622WHT is a high performance TFT LCD monitor providing high quality image from the analog RGB input. This monitor supports VGA signal input at vertical refresh rate of 60 Hz. It includes integrated signal processing unit, named LSP(LCD Signal Processor), which had all electronic function for user application. It is designed for industrial use with Auto power on and enhanced design margin for reliability 1-2.
1-3. Quick reference table of Characteristics Panel Size 6.2” Diagonal Active Display Area 148.8(W) x 53.76(H) mm Type No. Hitachi, TX16D11VM2CAA Number of Pixels 640 (H) x 240 (V) Pixel Arrangement RGB Vertical Stripe Pixel Pitch 0.2325(W) mm x 0.224(H) mm Color Depth 262K Color Surface Treatments Hard Coating (3H), Antiglare treatment Viewing Angle (CR≥ 10) Horizontal : Vertical : θL θR ΦH ΦL 60 degrees 60 degrees 45 degrees 60 degrees Contrast Ratio Typ.
Regulation(Safety , Ergonomics, EMC) CUL(UL+CSA), CE, FCC Environmental Operating Temperature : 10 to 50ºC / Humidity : 8 to 80% Conditions Storage Temperature : -20 to 60ºC / Humidity : 5 to 90% White Color Temperature 6500°K : CIE x=0.313±0.015 / y=0.329±0.015 Demonstrated MTBF More than 20,000 hours Touch Screen Touch Panel 4 Wire Resistive Type Controller HT-EBU4-1 Controller Interface USB Model No. : EFL-0622WHT Approval No.: 6.2-HIT-STD Engineering Specification Revision No.: 1.
2. USER CONTROL & OSD 2-1. Key Control Board UP (+) MENU DOWN (-) SWITCH NAME MENU SEL (AUTO) Status LED Cable Connect SWITCH FUNCTIONS Activate / Deactivate the OSD Menu Window. Move cursor to Sub Menu from Main menu.
2-2. OSD Menu Screen PICTURE brightness 100 - + UTILITY contrast + 80 - sharpness 4 1 2 3 4 5 h position 50 - + v position 50 - + phase 18 - + frequency 105 - + mode fill to aspect ratio normal PICTURE color temp 6500 7300 9300 user UTILITY language english german factory press to reset power on time information Model No. : EFL-0622WHT Approval No.: 6.2-HIT-STD 10 hr 640 x 480 / 60Hz Engineering Specification Revision No.: 1.0 Page : 7 of 9 Issue Date: Jul. 11.
2-3. OSD Control Functions CONTROL Auto Tracking FUNCTION Automatic screen adjustment process. If there is any noise on the screen or screen shift, just press “ SEL” button. Since this monitor is equipped with “Auto Tracking” function, it will automatically configure the monitor setting. Brightness Adjust the brightness level of the Display Contrast Adjust the contrast level of the Display.
3. CONNECTOR PIN DESCRIPTIONS 3-1. 15 Pin D-SUB Connector Shape and pin number Pin Description Pin Description 1 Red 9 No Connection 2 Green 10 Ground - Sync 11 6 1 12 7 2 3 Blue 11 No Connection 13 8 3 4 Ground 12 No Connection 4 5 Ground 13 Horizontal Sync 14 9 6 Ground - Red 14 Vertical Sync 10 5 7 Ground - Green 15 No Connection 8 Ground - Blue 15 4. STANDARD DISPLAY MODE No. 1 Mode VGA Resolution 640 x 480 Model No. : EFL-0622WHT Approval No.: 6.
5. MECHANICAL STRUCTURE TBD Model No. : EFL-0622WHT Approval No.: 6.2-HIT-STD Engineering Specification Revision No.: 1.0 Page : 10 of 9 Issue Date: Jul. 11.
