User's Manual

Model No. : EFL-1703X
Engineering Specification
Approval No.: 17-SS -STD Revision No.: 2.2 Issue Date: Aug. 03. 2004
2-3. OSD Control Functions
CONTROL FUNCTION
Auto Tracking
Automatic screen adjustment process.
If there is any noise on the screen or screen shift, just press “ SEL”
button.
Since this monitor is equipped with “Auto Tracking” function, it will
automatically configure the monitor setting.
Brightness Adjust the brightness level of the Display
Contrast Adjust the contrast level of the Display.
Sharpness Adjuust the sharpness level of the Display
H position Adjust the position of the display horizontally.
V position Adjust the position of the display vertically.
Phase Adjust the clock phase of the display.
Frequency Adjust the clock frequency of the display
Mode Select the video aspect ratio. It depends on the input video format.
COLOR TEMP Choose different preset color temperatures
(6500/7300/9300) or set your own customized color parameters.
Red /Green / Blue GAIN Adjust the Red/ Green / Blue Gain
Language Select the OSD language
Factory recall Recall the factory setting value.
Power On time Displayed the total power on time.
Information Displayed the resolution of input signal
Color Set the color (saturation) level
Tint(Hue) Set the hue level. Only for the “NTSC” system
Video Format Select the corresponding input video system.
“Auto” setting means monitor automatically recognize the input video
system. – Default setting
AUTO, NTSC M, NTSC 4.43, PAL M, PAL BGDHI, PAL N SECAM
Self Test Pattern To enter auto burn-in mode, press “Up” key first and then “Sel” key
simultaneously for 3 seconds.
On this mode, Red – Green – Blue – White – Black test pattern will be
displayed. Press Menu key for returning normal display mode.
* Brightness and Contrast value can be set individually for each input mode.
* Color Temperature can be set individually for RGB and Video (S-Video).