User guide

Operation of EFAS – Driver and Co-Driver 29© by EFKON AG

4. The display offers the Daily report print-

out?

5. If you require a daily report printout, use the cursor

keys

to select YES and press OK.

The list of driver activities will then be printed. If your

shift had started the day before, the respective activi-

ties are also printed. Your driver card will be ejected

subse

quently .

If you don't require a printout, ignore the input by

pressing the

key . Your driver card will be ejected.

6. Withdraw the driver card of the co-driver, if necessary.

Press key 2

for longer than 1.5 seconds to withdraw

the card.

The driver card of the co-driver is ejected.

Note

If you did not end your shift, you will have to complete your

activities up to the end of this shift when inserting your driver

card next time.

3.5 Continuing a Shift

This section describes how to continue an interrupted shift.

Complete all your performed activities manually starting at

the time of the last driver card withdrawal.

Proceed as follows:

• Insert driver card

• Complete activities

• Acknowledge activities

Example:

Note

To be able to continue the shift, the end of the last activity com-

pleted by you must coincide with the time you last inserted your

card.

This is the only way the digital tachograph recognises that

you want to continue a shift.

Note

When completing the activities, all times must be specified as

UTC times.