User guide

Operation of EFAS – Driver and Co-Driver 31© by EFKON AG
3
6. Press OK to acknowledge the selected activity.
7. Use the cursor keys to select the UTC date when you
st
opped this activity, if necessary. Press OK.
8. Use the cursor keys to select the current UTC when
you stoppe
d this activity and press OK.
The display shows the date and the time of the end of
your
last activity and the question
End of prev.
work time?
.
9. Use the cursor keys to select
NO and press OK.
Repeat steps 5 to 8 for the next activity until the end
of the last activity coincides with the time of last card
insertion.
Acknowledge Activities
The display shows Complete manual inputs?
to confirm your entries.
10. Use the cursor keys to select
YES and press OK to
acknowledge.
The data is written to the driver card.
The entries are now complete. You are ready to go.
or
Use the cursor keys to select
NO to cancel your entry
and press OK. The query starts again with step 3.
Note
The card insertion procedure is completed when the correspond-
ing card symbol
stops flashing. If it is flashing, the card is not
yet available for the digital tachograph and it is not possible to
change to another screen.
Note
Do not start driving while the card symbol is blinking. 
As soon as the vehicle starts moving, the digital tachograph
automatically changes to driving time for the driver and
to availability for the co-driver. When the vehicle stops,
the digital tachograph automatically changes to work period
for the driver.
If the stop is shorter than 2 minutes, the digital tachograph
will deactivate the automatic change from driving time to
work period.