User guide

Operation of EFAS – Driver and Co-Driver 35© by EFKON AG

You may start your journey.

In this section, you entered your activities for the previous

shift, completed the previous shift and started a new shift.

3.7 Acknowledging Events or Faults

The digital tachograph displays a warning for certain events

or errors. When a warning is displayed, a tone is heard and

the red LED flashes. The tone is repeated for approximately

30 sec. The warning is displayed until it is acknowledged by

pressing OK.

A list of EFAS warnings and messages is given in the

section "Messages" on page 76.

Display Additional Information

Use cursor keys  or to display additional informa-

tion on a warning. It is not possible to acknowledge a

warning when additional information is displayed.

When displaying additional information on a warning, the

rst line displays the following information:

• Pictograms of warning

• Service ID (SrvID) number

• Number of unacknowledged warnings with the same

SrvID.

The second line displays the following information:

• Time and date (UTC): start of event or fault. If the number

of una

cknowledged warnings of the same SrvID is > 1,

the start time of the first event or fault will be displayed.

The SrvIDs can be found in the section "Messages" on

page 76. More information about service IDs can be found

on page 125.

Note

If a digital tachograph or motion sensor error occurs, an event or

fault may be displayed repeatedly. In this case, the digital tacho

graph must be checked in a workshop.