User guide

Operation of EFAS – Driver and Co-Driver 37© by EFKON AG
3
3. Use the cursor keys  and to select the current
time zone.
4. Press OK.
The new time zone will be stored.
3.9 Setting a Ferry/Train Crossing
When using a ferry or a train with your vehicle, you have to
set the condition “Ferry/Train Crossing”.
You cannot set the condition “Ferry/Train Crossing” if the
condition “Out of scope“ (digital tachograph not required) is
active.
The condition “Ferry/Train Crossing” is deactivated auto-
matically when your vehicle starts moving again.
Note
It is not possible to change the digital tachograph settings when
driving. Park your vehicle to change the settings.
Note
For more information on using the menus, see the section
“General Settings” on page 60.
Setting a Ferry/Train Crossing
1. Park your vehicle on the train or ferry.
2. Press OK.
The main menu is displayed.
3. Select
Inputs
4. Press OK.
5. Select
Begin.
6. Press OK.
The condition “Ferry/Train Crossing” is enabled.
This condition is deactivated automatically when your
vehicle starts moving again or when the condition
“Out of scope“ (digital tachograph not required (OUT))
is enabled.