User guide

Operation of EFAS – Driver and Co-Driver 41© by EFKON AG
3
6. Use the cursor keys and  to select the required
data and press OK.
7. The stored data is displayed.
8. Press  to
display the next line.
9. Press  if
you want to return to the menu.
The display shows
24h Print Daily
Reports?
10. Use the cursor keys to select
YES if you want to print
the displayed data.
or
Select
NO if you want to return to the menu without
printing the data.
11. Press OK.
3.12 Printing Data
This section explains how to print the data that is stored in
the digital tachograph or on the tachograph card.
It is possible to print the following data:
• Daily reports of your driver card/workshop card
• Daily reports of the digital tachograph
• Events and faults stored on the driver card/workshop
card
• Events and faults stored in the digital tachograph
• Over speeding
• Technical data
• Speed profile (digital tachograph option)
• Engine speed profile (digital tachograph option)
• D1/D2 status changes (digital tachograph option)
If two driver cards or a driver card and a workshop card are
inserted, you have to specify from which card the data has
to be printed from.
Use key to cancel printing at any time.
For examples and explanations of printouts, see the section
"Printout Examples" on page 83.
For explanations of messages that may be displayed during
printout, see the section "Messages" on page 76.
Note
Data cannot be printed when driving. Any printout is cancelled
when the vehicle starts moving.