User guide

Operation of EFAS – Company Representatives56 EFAS
5
Registration of Company
1. Turn on the ignition.
2. Make sure that there is no card inserted or only one
driver card.
3. Insert your company card into one of the vacant card
slo
ts. The card data is read and your company data is
displayed.
If no company is registered, your company will be
registered automatically.
or
If your company was registered before, the following
in
formation is displayed.
or
if another company is currently registered, the display
shows the following screen:
4. Use the cursor keys  or to select
YES and press
OK to register your company on the digital tacho-
graph.
or
Use the cursor keys
to select NO and press OK if you
do not want to register your company once again.
Then you have access to data that had already been
allocated to your company (if you have already
registered your company).
or
The company card in the specified slot was ignored
(in
this case “2”, co-driver). There is already a com-
pany card in card slot 1.
or
There is a different card in the digital tachograph, i.e. 
automatic registration is not possible.
Note
If there is no entry within the next 30 seconds, registration will be
cancelled.