User guide
General Settings 63© by EFKON AG
7
7 General Settings
This section describes how to change the general settings
of the digital tachograph EFAS. The settings comprise:
7.1 Printouts (page 64)
7.2 Display (page 65)
7.3 Tones (page 68)
7.4 Clock (page 69)
7.5 Company Lock (page71)
7.6 Automatic Setting of Activity after Ignition OFF/ON
(page 72)
7.7 >>Warning (page 73)
The digital tachograph settings are changed using the
menus. The following instructions describe how to work
with the menus in general. This chapter comprises also the
description of the menu items „Card info“ and „Version info“:
7.8 Displaying Card Information (page 74)
7.9 Displaying the Device Data (page 75)
It is only possible to call up menus when no messages or
warnings are displayed. Acknowledge any warnings before
calling up menus. For more information, see the section
"Acknowledging Events or Faults" on page 35.
Usually, no tachograph card is required for changing of set-
tings. For more information on when a tachograph card is
required, see the relevant instructions.
Working with the menus
1. Press OK.
The main menu is displayed.
2. Use cursor keys and to select the required menu.
Press OK to acknowledge your choice.
The next submenu is displayed.
3. Repeat step 2 until you reach the required setting.
4. Key is used to return to the next higher menu level.
The following instructions use an abbreviated description of
menu selection. The required menu items are separated by
arrows “
→
”.
E.g., the following display
OK
→
Settings
→
Display
→
Language
Means:
1. Press OK.
2. Use cursor keys and to select the menu item
Settings. Press OK.
3. Use cursor keys and to select the menu item
Display. Press OK.
4. Use cursor keys and to select the menu item
Language. Press OK.
The current settings are marked “ ”, new settings are
marked “?”
“ English”
means that the currently set language is English
Francais ?
means that French will be set as language if you press OK.