User guide

General Settings64 EFAS

7.1 Printouts

This section explains how to change the settings for printing

and print preview. This includes:

• Local time

7.1.1 Local Time

According to EU regulations, the times specified on the

printout and in the print preview are output in UTC time. For

easier inspection, the times can also be output in local time

by using the setting “Local Time”.

1. Select

→

Printout

→

Local Time

The current setting is displayed.

2. Use cursor keys  and to select the required set-

ting. Press

OK.

Note

If the setting “Local Time” is chosen, a corresponding note will

appear on the printout. However, this printout is not valid for a

controlling body!

Note

In the mode CONTROL the setting is automatically set to “off”,

i.e. the printout and print preview always comply with the EU

regulation.

If “Local Time” is selected, the printout header is as follows:

Example:

Time difference to UTC is

1 hour + DST (+1 hour for DST) = 2 hours.

> Local time (LOC) <

LOC = UTC + 01h00 + DST

------------------------

 26/04/2008 16:45 (LOC)

------------------------

! (LOC) Local time !

! printout is not as !

! legally prescribed !

----------



 -----------