User guide

General Settings68 EFAS
7
7.3 Tones
You can use these menu functions to change the following
settings:
• Key click
• Notification tone
• Warning tone
7.3.1 Key Click
If the key click is on, any key stroke will be acknowledged
with an audio signal. This function is used to activate or
deactivate the key click.
Changing the Key Click Settings
1. Select OK → Settings → 
Tones
→ Key click
The current key click setting is displayed.
2. Use cursor keys and to select the required set-
ting. Press
OK.
The new setting is stored.
7.3.2 Notification Tone
The notification tone confirms correct entries and signals
notifications from the digital tachograph with a short audio
signal. This function is used to activate or deactivate the
notification tone.
Changing the Notification Tone Settings
1. Select OK → Settings → 
Tones
→ Notifi. tone
The current notification tone setting is displayed.
2. Use cursor keys and to select the required set-
ting. Press OK.
The new setting is stored.