User guide

General Settings72 EFAS
7
7.5.2 Activating the Company Lock
This function is used to activate the company lock.
The company lock is used to prevent other companies from
reading data on your drivers that is stored in the digital tach-
ograph.
If the company lock for your company is already active on
the digital tachograph, you cannot activate the company
lock.
The company lock can be activated only by inserting your
company card into one of the two slots and by refusing
automatic registration (see the section "Automatic Registra-
tion of Company" on page 55).
Activating the Company Lock
1. Select OK → Settings → 
Company Locks → lock-in
A query is displayed.
2. Press
OK to activate the company lock.
7.5.3 Deactivating the Company Lock
This function is used to deactivate the company lock.
The company lock can only be deactivated with the
company card you used to activate the company lock.
Ensure to insert a company card in one of the slots which
was registered on the digital tachograph.
Deactivating the Company Lock
1. Select OK → Settings → 
Company Locks → lock-out
A query is displayed.
2. Press
OK to deactivate the company lock.
7.6 Automatic Setting of Activity 
after Ignition OFF/ON
If “Activity Ignition” is activated, the activity (  ,  or  )
that was programmed by the company will be automatically
set for the driver and/or co-driver after the ignition is turned
on/off.
In the digital tachograph mode COMPANY, the activity for
the driver and co-driver can be selected by using the func-
tion “Activity Ignition”. This is set automatically after the igni-
tion is turned on/off. Calling up this menu also deactivates