User guide
Printout Examples 83© by EFKON AG
9
9 Printout Examples
This section contains examples of digital tachograph printouts. The examples are provided with explanations which explain the
contents of the printouts.
This section includes examples of the following printouts:
9.1 Driver activities (daily report) from the card - 24h (on page 84)
9.2 Driver activities (daily report) from the vehicle unit - 24h (on page 88
)
9.3 Events and faults from the card - ! (on page 92)
9.4 Events and faults from the vehicle unit - ! (on page 96
)
9.5 Technical data - (on page 98)
9.6 Speeding - (on page 101)
9.7 Vehicle speed profile - km/h (on page 104) (EFAS option)
9.8 Engine speed profiles - RPM (on page 107
) (EFAS option)
9.9 D1/D2 status changes - D1/D2 (on page 110) (EFAS option)
The numbers on the right-hand side in the printout examples are references to regulation (EC) No. 1360/2002 for a better
identification and definition according to the sections on the printouts.
In the following printout samples the description for conditionally printed information are set into square brackets [ ]. E.g. addi-
tional identification codes are printed only for ambiguous pictograms of recorded events or faults in order to explain different
causes of their occurence.
Card numbers are printed incompletely (masked) due to data privacy reasons if the referenced card is not present in the
tachograph at printout time. Every second character is left blank in masked numbers.