SDS

Lamp Material Data Sheet (LMDS)-(MSDS) EFL Electric Fence Light Company
Product: EFL LED/Z-Bulb Fence Lights LMDS# 160509A
All Lamp Types, Base Types, and Wattages Date: 05-09-16 Page-1 of 2
Section 1. Manufacturer and Contact Information:
EFL Electric Fence Light Co
17638 Dodson Branch Hwy
Cookeville, TN 38501
Phone: [phone] [e-mail]
Section 2. Hazardous Ingredients/Identity Information:
These lights do not contain any hazardous materials in reportable quantities.
Exposure Limits in Air
Material (CAS #)
OSHA PEL ACGIH TLV PERCENTAGE
mg/m3 mg/m3 by weight
Inert Materials (metals, glass) ~100%
Section 3. Physical Properties:
Not applicable to an intact lamp. These items are light bulbs in various shapes, configurations,
and designs. All contain solid-state light emitting diodes (LEDs)or xenon gas as the light-
generating source. The LEDs or Xenon are contained in various bulb (envelop) types and shapes
that may be constructed of aluminum, glass, plastic, or a combination of these materials. Some
products also contain circuitry to energize the LEDs. Our LED lights are fitted with a metal base
or pins for installation in appropriate lighting fixtures. These bases are generally comprised of
aluminum, nickel-plated tin, nickel-plated brass, plastic or a combination of these materials. The
Xenon models are configured with a self-contained flashtube within a Mylar tube or a plastic
globe and base.
Section 4. Fire and Explosion Hazards:
Not applicable to an intact bulb. Under extreme heat the outer glass (or plastic) envelope may
melt or crack.
Section 5. Reactivity:
Not applicable to an intact bulb.
Section 6. Health Hazards:
Not applicable to an intact bulb.
No adverse health effects are expected from occasional exposure to broken bulbs, but as a
matter of good practice we recommend wearing gloves when handling these lights .
These bulbs could become warm while operating, however they do not pose a burn hazard. If
the outer bulb breaks, the inner discharge capsule may continue to operate. Disconnect, or turn