Installation Instructions

Mounting Instructions

Page 36

English

CAUTION!

Ensure that the device is not inclined to a degree further than permitted.

Inclination along the direct axis: Continual: 35°

Temporary (<10 minutes): 45°

Inclination along the quadrature

axis:

Continual: 20°

3.4 Planning the installation space

Please read this chapter carefully before you start mounting the device.

You now need to plan where to secure the mounting plate and fuel

cartridge holder, as well as where to position the openings for the air

supply, off-heat duct and exhaust hose.

햲

햴

햳

• The electrical connections (2), the fill

opening for Service Fluid (1) and the

fuel cartridge (3) must be easily

accessible.

Examples for the off-heat duct and exhaust hose

• The off-heat duct supplied enables a controlled discharge of warmed

air, which allows the device to be operated even in confined spaces.

Off-heat duct and exhaust hose

through the side panel of the

installation space

Off-heat duct and exhaust hose

through the base of the

installation space