Installation Instructions

Mounting Instructions

Page 34

3.2 Tools

You require the following tools and sealants to install the fuel cell:

• Electric drill

• Jigsaw

• Screwdriver

• 3 mm Allen key (Inbus)

• Sealant

• Scissors or cutters

Choose the following screws depending on the mounting surface (screws

are not included in the delivery):

• 8 screws to secure the mounting plate (use 90° countersunk screws

with a 5 mm diameter. The shape of the shaft and thread depends on

the material on which the mounting plate is to be secured.)

• 4 screws to secure the operating panel

• 4 screws to secure the fuel cartridge holder (use screws with a 5 mm

diameter. The shape of the shaft and thread depends on the material on

which the fuel cartridge holder is to be secured.)

• Cable clamps to secure the cables if required

3.3 Important guidelines on choosing a location for installation

Installation should be carried out by trained personnel.

Ensure that there is sufficient unoccupied space behind the installation

area before you drill or saw any openings. Please also observe the safety

information provided by the tool manufacturers.

CAUTION!

Solvents may emit fumes during sealing. Ensure that there is sufficient

ventilation and follow the instructions for using the sealing compound.

English