Installation Instructions

Mounting Instructions

Page 39

2. Secure the mounting plate in the

desired location using eight 90°

countersunk screws with a 5 mm

diameter. Use suitable screws and, if

necessary, dowels to ensure that the

mounting plate will remain in place

even if significant force is applied to it,

for example, in the event of an

accident.

3. Place the device on the mounting

plate.

3.7 Creating openings for the off-heat duct and exhaust hose

The mounting instructions provided here are based on a scenario in which

the waste heat is conducted through the base of the installation space.

Follow the same steps if the waste heat is to be conducted through the side

panel of the installation space.

1. Attach the off-heat bow to the off-heat

flange.

English