User's Manual

PICS User’s Manual 07 June 2004
22
SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
3.5.1 PICS Reader Initialization File
A sample listing of the reader.ini file is shown below.
[SYSTEM]
DISPLAY ENABLE=1
LANE COUNT=1
[TCPIP]
IP ADDRESS=172.16.32.225
NET MASK=255.255.255.0
DEFAULT GATEWAY=172.16.32.1
DNS SERVER=0.0.0.0
PORT NUMBER=50000
[LANE 1]
LANE NAME=Lane 1
CFG FILE NAME=c:\hanscom.cfg
[LOGGING]
ENABLE=1
Table 2 Reader.ini Field Definitions
Section Field Meaning
LANE COUNT
Identifies the number of lanes the
reader is intended to operate. For
each lane, there is a separate section
(named LANE 1, LANE 2, LANE n)
which identifies a configuration file for
that lane.
SYSTEM
DISPLAY ENABLE
Set to 0 to disable message output to
the monitor. Typically should be left
at 1.
IP ADDRESS
This is the IP address assigned to the
Reader by the network administrator.
Specified as xxx.xxx.xxx.xxx
NET MASK
This is the net mask associated with
the IP address. This value may be
obtained from the network
administrator.
TCPIP
DEFAULT GATEWAY
This is the IP address for the default
gateway. This value may be
obtained from the network
administrator.